I created customized back panel and base plate compatible with Amiga 600/1200 for people who want to towerize Amiga. Back panel and base plate are compatible with Fractal Focus G Mid Tower.
Cost of back panel and base plate is 70GBP (Stainless steel 0.8mm).
Most of required screws and some of 3d printed items are included. If in doubt please ask.
Cost of ATX/SFX power adapter board with cable loom and power loopback is30GBP 35GBP. Not required when Mediator installed.
This is DIY project and require certain skills and tools.
I can offer limited (if spare time allows me) number of pre-assembled units at cost 250-270GBP (depends of cost of Fractal tower) .
RF Modulator has to be removed. It is focused on ReAmiga boards.
P&P to be quoted individually. Please be aware about customs fees (I can post with pre paid duties at request)
More detailed pictures here
Base plate: Items on the picture below are included.
Back panel: stiffener, holder for MicroSD card extender and one 3d printed bracket for SD2IDE or CF2IDE included.
Cable loom and loopback are part of power adapter board.
Now proper PCI/Zorro bracket available at 25GBP.
Mouse/Keyboard adapter board available at additional cost of 35GBP.
It uses firmware from this project with permission of designer.
Mouse and keyboard can be connected to one port via USB hub.
On ReAmiga boards there is header near DB9 port for keyboard.
On original boards keyboard MPU top hat is required (except 2B motherboard revison, can provide more details, but please check AmigaPCBExplorer), just ordered prototype PCB top hat-will test soon.
It seems to be a picky with hub support (not every one works). This one works perfectly.
Cost of back panel and base plate is 70GBP (Stainless steel 0.8mm).
Most of required screws and some of 3d printed items are included. If in doubt please ask.
Cost of ATX/SFX power adapter board with cable loom and power loopback is
This is DIY project and require certain skills and tools.
I can offer limited (if spare time allows me) number of pre-assembled units at cost 250-270GBP (depends of cost of Fractal tower) .
RF Modulator has to be removed. It is focused on ReAmiga boards.
P&P to be quoted individually. Please be aware about customs fees (I can post with pre paid duties at request)
More detailed pictures here
Base plate: Items on the picture below are included.
Back panel: stiffener, holder for MicroSD card extender and one 3d printed bracket for SD2IDE or CF2IDE included.
Cable loom and loopback are part of power adapter board.
Now proper PCI/Zorro bracket available at 25GBP.
Mouse/Keyboard adapter board available at additional cost of 35GBP.
It uses firmware from this project with permission of designer.
Mouse and keyboard can be connected to one port via USB hub.
On ReAmiga boards there is header near DB9 port for keyboard.
On original boards keyboard MPU top hat is required (except 2B motherboard revison, can provide more details, but please check AmigaPCBExplorer), just ordered prototype PCB top hat-will test soon.
It seems to be a picky with hub support (not every one works). This one works perfectly.
Last edited:
