Hi everyone,
I sold my working A4000 a couple of weeks ago. I sold it without any of my expansion-cards.
In the A4000 I was using the Cybervision64 card together with a scandoubler card. The OUT-signals from both the cards was connected to a Ratteswitch. This setup was working without problem for both the Cybervision64 (RTG-signal) and from the Scandoubler (PAL/NTSC-mode from Amiga). Ratteswitch OUT was connected to a Philips 109/s4 VGA monitor. See pictures of how my setup was connected before A4000 was sold.
Cybervision 64 4Mb: 250EUR (sold to Mokry)
The OUT (RTG) port was working both directly connected to an PC VGA monitor or via the Ratteswitch. I dont know why I not could get any picture on monitor if Scandoubler was connected to IN (passthrough) on this card. I was using a Ratteswitch instead.
Compserv scandoubler: 120EUR (sold to Szmn)
This card was working without any problem when connected directly to an PC VGA monitor or connected to the Ratteswitch.
Ratteswitch + 4 cables: 50EUR (sold to Szmn)
Working as it should.
Cables included are two VGA cables, one CybervisionPPC cable and one cable for Indivision Mk3.
This switch was bought from user highpuff in his sales-thread here on Amibay.
If you declare interest please state which item you want to buy.
Payment: Paypal f&f
Shipment prices (these are approximate):
EU - around 20-25EUR (tracked)
UK - around 20-25EUR (tracked)
US - around 25EUR (tracked)
I sold my working A4000 a couple of weeks ago. I sold it without any of my expansion-cards.
In the A4000 I was using the Cybervision64 card together with a scandoubler card. The OUT-signals from both the cards was connected to a Ratteswitch. This setup was working without problem for both the Cybervision64 (RTG-signal) and from the Scandoubler (PAL/NTSC-mode from Amiga). Ratteswitch OUT was connected to a Philips 109/s4 VGA monitor. See pictures of how my setup was connected before A4000 was sold.
Cybervision 64 4Mb: 250EUR (sold to Mokry)
The OUT (RTG) port was working both directly connected to an PC VGA monitor or via the Ratteswitch. I dont know why I not could get any picture on monitor if Scandoubler was connected to IN (passthrough) on this card. I was using a Ratteswitch instead.
Compserv scandoubler: 120EUR (sold to Szmn)
This card was working without any problem when connected directly to an PC VGA monitor or connected to the Ratteswitch.
Ratteswitch + 4 cables: 50EUR (sold to Szmn)
Working as it should.
Cables included are two VGA cables, one CybervisionPPC cable and one cable for Indivision Mk3.
This switch was bought from user highpuff in his sales-thread here on Amibay.
If you declare interest please state which item you want to buy.
Payment: Paypal f&f
Shipment prices (these are approximate):
EU - around 20-25EUR (tracked)
UK - around 20-25EUR (tracked)
US - around 25EUR (tracked)
Attachments
Last edited:
