Sold DivIDE & SD Card Adaptor

  • Thread starter Thread starter wmsteele
  • Start date Start date
  • Replies Replies 11
  • Views Views 3311
Status
Not open for further replies.

wmsteele

Well-known member
AmiBayer
Rating - 100%
176   0   0
Joined
Mar 4, 2010
Posts
1,775
Country
Scotland
Region
Renfrewshire
DivIDE for Sinclair ZX Spectrum & SD to IDE Adapter.

Currently loaded with Fatware 0.12. Compatible with all Spectrum's, might require a jumper change on the card depending on the model its going to be used with. Following link contains details on software and jumper configurations... http://velesoft.speccy.cz/zx/divide/divide-soft.htm

Also included is a SD to IDE adapter card, this has been modified to work with the DivIDE card by soldering a wire between two pins (see picture). My soldering skills aren't the best so this may need redone. The SD adapter is separate form the DivIDE card, in the pictures its plugged into the IDE socket.

No memory card included, card in pictures is only to show the unit working. Any SD card can be used, formatted as FAT 16, so 2Gb is the max (enough space for everything ever released!). *.sna, *.z80 and *.tap can then be copied to the card and loaded by pressing the NMI button and using the file selector.

£42 £32 plus postage. PayPal gift (or add 4%).

P1010194.jpg P1010195.jpg

P1010197.jpg

P1010193.jpg P1010191.jpg

(Speccy 128 not included :roll:)
 
Last edited:
To Greece would be...
Royal Mail Airmail, £4.16
Royal Mail Airsure, tracked and insured £9.31
 
Last edited:
Second in line

Second in line

Interested. Second in line. Postage to Brazil please, ZIP 01315-001. Thanks!
 
To Brazil would be...
Royal Mail Airmail, £5.42
Royal Mail Airsure, tracked and insured £10.57
 
Interested and PM sent after the postage costs where informed.

I'll try it with untracked costs this time as small packets are always getting to me safe. Just pack it very well and it might get to me without problems. My personal email information was sent in private. We'll get it from there.
 
Just waiting for halkx to respond, being first to express interest. If no response pkersey is next in line.
 
@wmsteele

I'm glad to announce the package has just got to me. The interface was tested and works perfectly! Thank you very much for a very pleasant negotiation. Looking forward to make business again.
 
Status
Not open for further replies.
Back
Top Bottom