A manual switch serves me well enough for now, I do not often fall back in aga.. This is meant to manual switch between indivison aga and cybervision.
The vga connector was wired to be able to put the print above caps on the a1200. It would have been nicer to user other connector but have been waiting 3 weeks for it..
The power connector turned out to be a fake so I jump wired two ps-2 ports and put 5 volt on it when Installed. After that I connected the +5v behind the diodes and the - to random gnd.
Switch was wired to hotglue it later on. One bridge formed, like the switch.
I am waiting with the leds, if it mounts unther the ventilation holes probably will use another color for indivision aga/ cybervision
Needs build in but still works.. I have got male to male pieces to enable plug in... This is cheap manual internal switch...
Two things went wrong so far, some track dammage on removed vga connector, but easily repaired
Only vga out removed..
pfft fake power connector not soldered and missing parts to convert rated 9V
The ps/2 ports power bridged, a missing switch bridged, switch wired..
For now the end result. Power will be taken from power connector on amiga.
It feeds the diode 5v as was otherwise supplied by 2 PS/2 mouse ports from the pcs
