Selling my Great Valley Products GeForce 030 Combo card including 4MB RAM BOX version.
The card is in excellent condition apart from some faults (see below), comes boxed with manual.
No sign of any repair attempts or modifications.
Same serial numbers on box, manual and card.
I used it as a SCSI controller where it worked perfectly.
It allowed collision-free automatic switching of the boot system from the disk using kickstart (GVP can do that).
Additional ROM mapping (GvpCpuCtrl FASTROM).
This is what you get:
GVP GeForce Combo 030 68030 CPU + 68882 FPU at 40 Mhz
4 MB original GVP RAM
Onboard SCSI (tested)
Manual
Original box.
1 x 4MB 64 pin SIMM sockets
This is a project intended for repair, which has been used in my collection for several years only as a SCSI controller (JP12 OFF). The card actually works (see screenshots), disabling the 4 MB RAM on board. However, an error appears on the early boot screen (see screenshots), damaged RAM (J12 ON). This state does not allow the card to turn on the accelerator, and the 030 processor mounted on the card does not work. For an experienced electronics technician, this will be a chance to get a complete set of a high-clocked GVP card.
In addition, one of the 4 SIMM sockets clamp is quite loose/broken, currently holding the RAM modules.
Sold as is, no returns. Will be very well packed. Offers accepted.
Asking 185€ + shipping. Shipping prices: 15€ to the USA, 25€ to EU countries and 35€ to the UK. Payment via PayPal (Friends and Family).
You need to send a PM (as per site rules) after you have declared interest. If you don't send a PM, nothing will happen until you do.
Also advertised elsewhere.
The card is in excellent condition apart from some faults (see below), comes boxed with manual.
No sign of any repair attempts or modifications.
Same serial numbers on box, manual and card.
I used it as a SCSI controller where it worked perfectly.
It allowed collision-free automatic switching of the boot system from the disk using kickstart (GVP can do that).
Additional ROM mapping (GvpCpuCtrl FASTROM).
This is what you get:
GVP GeForce Combo 030 68030 CPU + 68882 FPU at 40 Mhz
4 MB original GVP RAM
Onboard SCSI (tested)
Manual
Original box.
1 x 4MB 64 pin SIMM sockets
This is a project intended for repair, which has been used in my collection for several years only as a SCSI controller (JP12 OFF). The card actually works (see screenshots), disabling the 4 MB RAM on board. However, an error appears on the early boot screen (see screenshots), damaged RAM (J12 ON). This state does not allow the card to turn on the accelerator, and the 030 processor mounted on the card does not work. For an experienced electronics technician, this will be a chance to get a complete set of a high-clocked GVP card.
In addition, one of the 4 SIMM sockets clamp is quite loose/broken, currently holding the RAM modules.
Sold as is, no returns. Will be very well packed. Offers accepted.
Asking 185€ + shipping. Shipping prices: 15€ to the USA, 25€ to EU countries and 35€ to the UK. Payment via PayPal (Friends and Family).
You need to send a PM (as per site rules) after you have declared interest. If you don't send a PM, nothing will happen until you do.
Also advertised elsewhere.
