Sold GVP Tekmagic 2060

  • Thread starter Thread starter Mokry
  • Start date Start date
  • Replies Replies 23
  • Views Views 4175
Status
Not open for further replies.

Mokry

Active member
AmiBayer
Rating - 100%
53   0   0
Joined
Nov 3, 2020
Posts
567
Country
Ireland
Region
Sligo
Hi!

Due for upgrade to Blizzard 2060 I have for sale GVP Tekmagic 2060 for A2000. It was bought here on Amibay. Card runs at 60MHz. Sometimes, when A2000 won't start, you have to wiggle card in the CPU slot. After that it works OK.
There are 3 options:
GVP Tekmagic without RAM and without CPU = (was 900e, was 850e, was 800e), now 750e
GVP Tekmagic with 128 MB Ram, but without CPU = (was 1000e, was 950e, was 900e), now 850e
GVP Tekmagic with 128 MB Ram and 68060 rev5 = (was 1250e, was 1200e, was 1150e), now 1100e
DSC_0014.JPG
DSC_0015.JPG
Payment via PayPal Friends.

Best regards.
 
Last edited:
Is there no backplate?
I think the Blizzard 2060 is hardly an upgrade, the GVP is on par or better, except the SCSI might be faster on the Blizzard.
 
All prices are in first post. With cpu Rev5 and 128mb ram I'd like to get 1250e + shipping. If you are interested, send me a PM, please.
 
How long have you had it running for, once the initial startup and wiggle is taken care of?
 
After I wiggle the card and amiga starts, I use to run it for couple of hours playing mods on IMP. I can put it back into A2000 and run the test again.
 
I had one of these in the late 90's paired with a Picasso II, 2MB Chip RAM upgrade and a Buddha IDE and the system was a total beast with only the Z2 bus speed bottlenecking performance in high resolutions. I could only ever overclock mine to 60mhz reliably, but damn if it wasn't fast. :)
 
Status
Not open for further replies.
Back
Top Bottom