Closed HID2AMI V2.0.2 with mousewheel support - HID MOUSE AND GAMEPAD to AMIGA ADAPTOR

[Rontti]

Adapter received and it's working fine. So far I've tested 4 different mice and here are the results:

Microsoft Wireless 900 Mouse = doesn't work
Logitech MX310 (wired) mouse = works
Cheap chinese gaming mouse = doesn't work
Cheap chinese wireless mouse = works

I'll test more mice as I find them around the house.

 

[Lemaru]

If you can capture the details for the devices you have found that don't work, and send them over to sampedenawa then there's a good chance that support can be added and new firmware released.

Regarding anyone else wanting one, it may be some time before my remaining ones are complete, and unsure if I will do anymore as yet. But if anyone wants just the printed case then I am happy to print these for anyone in need of one

 

[YvanLeFou]

Hi,
I am interested in an assembled unit. Shipping to France.

 

[sampedenawa]

Hi,
I am interested in an assembled unit. Shipping to France.

I'm sorry but at the moment I have no availability of assembled units, unless Lemaru has some spares still.
Maybe I will start a new production batch after this COVID-19 mess will be over.

 

[YvanLeFou]

Hi,
I am interested in an assembled unit. Shipping to France.

I'm sorry but at the moment I have no availability of assembled units, unless Lemaru has some spares still.
Maybe I will start a new production batch after this COVID-19 mess will be over.

Thanks for your reply. I will contact you again when things are back to normal.

 

[Lemaru]

Hi,

I have five spare that just need an STM32 added to them. I'll order some up soon just to finish these ones off and post back here when done.

I'm a little busy recently so it may be a few weeks

Thanks

 

[A500DaBest]

I am interested in this device and would like to buy it. How much would it cost? Do you ship to Canada? I would like to buy it with it having it's case and shell installed with it and have the latest firmware updated. I am wondering can I use my PS 4/PS 3 controller on it?

 

[sampedenawa]

I am interested in this device and would like to buy it. How much would it cost? Do you ship to Canada? I would like to buy it with it having it's case and shell installed with it and have the latest firmware updated. I am wondering can I use my PS 4/PS 3 controller on it?

Hello, at the moment I do not have any assembled units, but as you can read just above, maybe Lemaru could arrange a few spares if he manages to buy missing STM32 chips.
Personally, I don't have any new production plans, at least until this COVID mess has over.

Of course you can use it with both PS3 and PS4 pads ! See compatibility chart on https://github.com/EmberHeavyIndustries/HID2AMI#compatibility-list

 

[A500DaBest]

I am interested in this device and would like to buy it. How much would it cost? Do you ship to Canada? I would like to buy it with it having it's case and shell installed with it and have the latest firmware updated. I am wondering can I use my PS 4/PS 3 controller on it?

Hello, at the moment I do not have any assembled units, but as you can read just above, maybe Lemaru could arrange a few spares if he manages to buy missing STM32 chips.
Personally, I don't have any new production plans, at least until this COVID mess has over.

Of course you can use it with both PS3 and PS4 pads ! See compatibility chart on https://github.com/EmberHeavyIndustries/HID2AMI#compatibility-list

You mean you refuse to ship the item due to COVID? How do I contact Lemarus?

 

[sampedenawa]

I am interested in this device and would like to buy it. How much would it cost? Do you ship to Canada? I would like to buy it with it having it's case and shell installed with it and have the latest firmware updated. I am wondering can I use my PS 4/PS 3 controller on it?

Hello, at the moment I do not have any assembled units, but as you can read just above, maybe Lemaru could arrange a few spares if he manages to buy missing STM32 chips.
Personally, I don't have any new production plans, at least until this COVID mess has over.

Of course you can use it with both PS3 and PS4 pads ! See compatibility chart on https://github.com/EmberHeavyIndustries/HID2AMI#compatibility-list

You mean you refuse to ship the item due to COVID? How do I contact Lemarus?

I mean I have more urgent things to do at the moment than taking care of starting a HID2AMI production batch. Simple as that.

I think Lemaru reads this thread from time to time; if you are in a hurry I think you can PM him directly: just look at the post immediately before your fist one here, on 05/15.

 

[super_adam]

I can help, I have as far as I remember at least two HID2AMI units ready to be loaded with firmware.
Can sell for 32 Euro each, worldwide registered shipping included. No case.
PM me if interested.

 

[Lemaru]

I am interested in this device and would like to buy it. How much would it cost? Do you ship to Canada? I would like to buy it with it having it's case and shell installed with it and have the latest firmware updated. I am wondering can I use my PS 4/PS 3 controller on it?

Hello, at the moment I do not have any assembled units, but as you can read just above, maybe Lemaru could arrange a few spares if he manages to buy missing STM32 chips.
Personally, I don't have any new production plans, at least until this COVID mess has over.

Of course you can use it with both PS3 and PS4 pads ! See compatibility chart on https://github.com/EmberHeavyIndustries/HID2AMI#compatibility-list

You mean you refuse to ship the item due to COVID? How do I contact Lemarus?

Sorry, I only check in here every now and then. Unfortunately it's not my best place to sell anything I make, purely due to too many time-wasters expressing interest or reserving items and then never paying or just not responding to messages. It really does make the selling process painful and put you off offering stuff here.

I do still have 5 that are just waiting on STM32 chips. I will order some as soon as I get time to focus on these, and will post back once they are ready.

 

[JazzTrumpetplayer]

Declared interest in two adapters. Will PM you with details about payment and shipping.

 

[Lemaru]

Declared interest in two adapters. Will PM you with details about payment and shipping.

I have responded by PM

 

[JazzTrumpetplayer]

I'm interested in two of these units. I'll PM you asap.

 

[Lemaru]

Just ordered the missing parts I need. I don't expect them to be here too soon due to shipping delays, but will post here when they are ready. Thanks

 

[Akira]

Where can I read more about this adapter? How's the latency like?

 

[sampedenawa]

Where can I read more about this adapter? How's the latency like?

https://github.com/EmberHeavyIndustries/HID2AMI
Latency is not perceptible.


Just released v1.9.3 firmware update, with a minor bug fix and added support for new Speedlink Competition Pro USB sticks.

Registered users should have received the update already; if not contact me and I will fix it.

 

[Lemaru]

**Edit - no longer available**

 

[Haider]

Pm interested