I have this system left over and have no use for it so have decided to move it on. Be aware I have not tested it much so it is sold as seen, I will list what I know works and then you can decide if you would to take this on. Posting within the EU only.
Asking price is £145 plus postage.
Amiga 1200 main board revision 1D4 (mouse, joystick, audio, RGB ports tested)
3.1 kickstart roms
Working DF0
Untested IDE Splitter
Two CD rom drives (both power on but tested no further)
What appears to be a Power Computing XL drive taken out of it's case and put in the tower, I could not get it to work in the 10 minutes I tried
200W PSU (20A on the +5V)
This will need a cable to power the Amiga board from the tower PSU, something along the lines of one of these however I will supply a standard A600 style PSU so you can use the system until you get that sorted out.
No keyboard is supplied, however I did plug one in and it was not registering, i'm unsure what the cause is but I suspect it's the port on the back of the tower that plugs into the main board or the ribbon. If required I have one of these adapters I will sell with the tower for an additional £15 (it's not for sale separately) but I do not know if this will be the solution.
Also to the buyer of the tower, I have a right angled pcmcia adapter I will offer for an additional £15 if you require one. Again not for sale separately.
Asking price is £145 plus postage.
Amiga 1200 main board revision 1D4 (mouse, joystick, audio, RGB ports tested)
3.1 kickstart roms
Working DF0
Untested IDE Splitter
Two CD rom drives (both power on but tested no further)
What appears to be a Power Computing XL drive taken out of it's case and put in the tower, I could not get it to work in the 10 minutes I tried
200W PSU (20A on the +5V)
This will need a cable to power the Amiga board from the tower PSU, something along the lines of one of these however I will supply a standard A600 style PSU so you can use the system until you get that sorted out.
No keyboard is supplied, however I did plug one in and it was not registering, i'm unsure what the cause is but I suspect it's the port on the back of the tower that plugs into the main board or the ribbon. If required I have one of these adapters I will sell with the tower for an additional £15 (it's not for sale separately) but I do not know if this will be the solution.
Also to the buyer of the tower, I have a right angled pcmcia adapter I will offer for an additional £15 if you require one. Again not for sale separately.
Attachments
Last edited:
