Sold KS MASTER - USB Programmable ROM with Auto-Switch/KickSwitch (1MB)

[pc13589]

Declaring interest.

---

interested in 2 units

You might have to wait for a while since I only have 1 left and it's going to nicoppc
If I decide to make more you'll be the first to get them

 

[Wrangler]

KS Masters received while I was away - they look great. Leaving feedback

 

[nicoppc]

Packet received and positive feedback.

Trying to get it running on a A600. Very good support from the seller.

 

[nicoppc]

It now actually works. I can program a ROM into it and the Amiga will actually start from it.

Thanks for the support !

For info, installation in an A600

 

[Reborn]

Declaring interest.

---

Declaring interested in one.

---

(Marked as sold/completed by pc13589)

 

[pc13589]

For info, installation in an A600

We'll never know what happens if you accidentally plug the rom in the wrong way around
I put a white dot near pin 1 to help with the orientation but it's quite small and it's near the header so I can see how it might get overlooked

A few more roms are coming in a couple of weeks, unfortunately I can only make them in very small batches, soldering small SMD components is quite time consuming...

 

[abundantmussel]

Declaring interest.

---

(Marked as sold/completed by pc13589)

 

[dargrz1977]

Kickstart 1Mb works on Amiga 2000. I recommend.

 

[Reborn]

Payment sent.

 

[pc13589]

Received payment from abundantmussel

Finally got some more components so I now have 4 more roms available if anybody else is interested

 

[St233t]

Declaring interest.

---

(Marked as sold/completed by pc13589)

 

[Leoncjo]

I see pin A18 and A19 on pcb, is there posibility to use 2mb rom ?

 

[pc13589]

I see pin A18 and A19 on pcb, is there posibility to use 2mb rom ?

Good catch
I might eventually make a 2MB version but at the moment I'm using 1MB chips, the board was designed with both options in mind so that's why there's a pin marked A19

That pin is currently used for the external reset line

 

[Leoncjo]

how much for 2mb version ?

 

[pc13589]

how much for 2mb version ?

At the moment I don't have one available, for a 2MB version I will also need to make some changes to the firmware so it might take a while

Unless you need to use the full 1MB for a single rom image you can still have 2 separate images, one in the lower 512KB bank and one in the upper 512KB, and switch between them even with the 1MB version

It's not as convenient as having 4 banks but since you can reprogram the rom quickly it's usually not a problem

 

[Leoncjo]

I would like to make custom rom with scsi.device, eide.device and partition contains workbench, filemaster and other useful tools. I saw that it's possible but need 2mb space.

 

[McTrinsic]

Declaring interest.

---

(Marked as sold/completed by pc13589)

 

[Dindi]

Declaring interest. Is it possible to have one with ehide.device too included to use in a a1200 with terribile fire 1230 64 mb ram ??

---

(Interest marked as expired by pc13589)

 

[pc13589]

I updated the first post and added a new item, it's a small module to program these roms from an Amiga.

Totally unnecessary and actually slower than programming them from a PC via USB due to the speed of the serial port, but I thought it would be cool to have an alternative to the PC software so here it is

 

[abundantmussel]

Package received this morning - feedback left. Thank you.