!!! Last unit available!!!
Hello to everyone,
Today, I would like again to present 2 new unused Amiga to MIDI Interface - 3xMIDI OUT, 1xMIDI IN and 1x MIDI THRU. It's a new product, not an old stock one. It's a classic interface for Amiga that you connect to the serial port (DB-25M Amiga port) and that allows you to connect your computer to a MIDI Module (like the Roland MT-32). It have also an optional possibility to be powered from a 12V external PSU (you can use a 12V 0.25A PSU and it will be more than enough) if you don't want to drain your good old Amiga motherboard. Apart that it also have two LEDs indicating that the device is ON and powered from the Amiga extension port or from the PSU. In addition with the Interface you will receive a 30 cm (about 12 inch) detachable cable allowing to connect the device to your Amiga (Amiga 500, 600, 2000 etc.). All unit are tested with an Amiga 1200 and a MT-32 and will be tested again before sending. The device have a small, light and simplistic design. Anyway you can judge it by yourself on the under posted pictures. The price is 35€ plus paypal fees and P&P. The unit will be posted using tracked priority registered air mail.
Any comments and questions are welcome.
Those are the last two units. For now I won't make any more for a while apart a batch order of about 10 units that is not too probable. The price for ordering parts and PCBs for 1,2 or 3 units will raise the price of about 20-25%, so I don't think that anyone in this case will be keen to take one.
PS. As martorellcarles asked my about a week ago if there's still some unit available (I had to assemble them) we can say that one unit is reserved for him under further notice. So as for now only one unit left.
From now on also available on the other bay.
Thank You for looking.
Hello to everyone,
Today, I would like again to present 2 new unused Amiga to MIDI Interface - 3xMIDI OUT, 1xMIDI IN and 1x MIDI THRU. It's a new product, not an old stock one. It's a classic interface for Amiga that you connect to the serial port (DB-25M Amiga port) and that allows you to connect your computer to a MIDI Module (like the Roland MT-32). It have also an optional possibility to be powered from a 12V external PSU (you can use a 12V 0.25A PSU and it will be more than enough) if you don't want to drain your good old Amiga motherboard. Apart that it also have two LEDs indicating that the device is ON and powered from the Amiga extension port or from the PSU. In addition with the Interface you will receive a 30 cm (about 12 inch) detachable cable allowing to connect the device to your Amiga (Amiga 500, 600, 2000 etc.). All unit are tested with an Amiga 1200 and a MT-32 and will be tested again before sending. The device have a small, light and simplistic design. Anyway you can judge it by yourself on the under posted pictures. The price is 35€ plus paypal fees and P&P. The unit will be posted using tracked priority registered air mail.
Any comments and questions are welcome.
Those are the last two units. For now I won't make any more for a while apart a batch order of about 10 units that is not too probable. The price for ordering parts and PCBs for 1,2 or 3 units will raise the price of about 20-25%, so I don't think that anyone in this case will be keen to take one.
PS. As martorellcarles asked my about a week ago if there's still some unit available (I had to assemble them) we can say that one unit is reserved for him under further notice. So as for now only one unit left.
From now on also available on the other bay.
Thank You for looking.
Last edited:
