Mediator help

[Lord_protector]

Hi all

I've got a mk4 3v black edition 4000di but my reamiga board dosent recognise it , even tryed all jumper settings on and off with and without zorro cards my 4k has 3.2 roms and bfg9060 100mhz installed tryed 25/50/100 mhz settings no avail.

 

[Boing-ball]

Hi all

I've got a mk4 3v black edition 4000di but my reamiga board dosent recognise it , even tryed all jumper settings on and off with and without zorro cards my 4k has 3.2 roms and bfg9060 100mhz installed tryed 25/50/100 mhz settings no avail.

You need to give more info on the reamiga board doesn’t recognise it. The mediator itself will only act as a Daughterboard until you plug in cards etc..

So what are you plugging into the mediator?

I have just recently install a Di Mk IV into a spare A4000D with a rev C (Rev 2) board. I set the following jumpers up:

Master = Jumper on
Winsize = jumper on
Swap config = off

This allows me to use the mediator with a Voodoo 3, Apocalypse PPC with 128MB extra RAM and a RTL839 Nic card. All PCI. Therefore why swap config = off.

 

[Lord_protector]

I think its a dodgy board even though it's new going to be tested at swag