For sale my Micrograf Tabby graphics tablet in working condition. Some yellowing to the plastic on top of the work surface and side of pen. The underneath has faired much better, guess this is due to not being in direct sunlight. Has been in storage for 20 years and worked first time this evening.
Comes with a 9-pin to 25-pin serial adapter as it uses the Amiga serial port to connect. Software driver comes on a floppy disk (provided), tested the executable straight from disk and the tablet jumped into life on my A1200.
From memory you need at least Workbench 2.0 to work. With the driver running you press CTRL-ALT-T to bring up a settings page to adjust sensitivity etc (photo below).
I made a video here to show the tablet in action, sorry for the angle but was a little difficult to fit the tablet and screen in while holding the phone up to record - you get the idea.
Can be used in conjunction with a normal mouse so you can jump between the two easily.
Looking for £25 PayPal payment as a gift + P&P.
Comes with a 9-pin to 25-pin serial adapter as it uses the Amiga serial port to connect. Software driver comes on a floppy disk (provided), tested the executable straight from disk and the tablet jumped into life on my A1200.
From memory you need at least Workbench 2.0 to work. With the driver running you press CTRL-ALT-T to bring up a settings page to adjust sensitivity etc (photo below).
I made a video here to show the tablet in action, sorry for the angle but was a little difficult to fit the tablet and screen in while holding the phone up to record - you get the idea.
Can be used in conjunction with a normal mouse so you can jump between the two easily.
Looking for £25 PayPal payment as a gift + P&P.
Attachments
Last edited:
