MiST FPGA Computer System $210
(No shipping charges in the US. Rest of the world...we need to discuss it.)
Revised 2k14 version in a high quality metal case, fully assembled, and ready-to-run. Click here for the MIDI version of MiST (also available at our website).
The MIST board uses modern hardware to implement classic 16 Bits computers like Amiga AGA, Atari ST(e), and 8 Bits systems like C64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, etc.
The MIST board isn't an emulation, it's a re-implementation of the original hardware in a FPGA.
Minimig Core for Amiga support ECS and AGA chipsets. Kickstart ROMs 1.2, 1.3, 2.0, 3.1 are also supported, and you will be able to load floppy disk images (ADF) and hard disk images (HDF) from the root directory or from subfolders. For more information about the installation of Amiga core, please click here.
For more information about the MIST, please visit the MIST Board Project page.
List of available Cores for MIST:
A2600
AMIGA Minimig Core
AMIGA AGA - Minimig-AGA core
Atari ST/STe and Mega STe - Mist core
Apple II+
Arcade
Atari 800
Colecovision
Commodore C64 - PGA64 Core
MSX
NES (Nintendo Entertainment System)
SMS (Sega Master System)
ZX Spectrum 48/128
ZX01/ZX81
Main Components:
Altera Cyclone EP3C25 FPGA
32 Megabytes 16 bit wide SDR SDRAM
AT91SAM7S56 ARM IO controller
MAX3421E USB host controller
TUSB2046 USB HUB
External connectors, buttons, and leds:
1 x Analog VGA output with 3*6 bits colour depth
1 x Stereo analog audio jack 3,5mm
1 x SD Card Slot
4 x USB (for keyboards, mouses, joysticks...)
2 x Classic joystick connectors (Atari's specification DB9: Amiga, Atari, Amstrad, C64, etc)
3 x LEDs (Power, FPGA and IO Controller)
3 x Pushbuttons (Board Reset, Menu, Core defined)
1 x Micro USB connector for power supply and IO Controller flash update
1 x Power Switch
Internal Connectors, switches and jumpers:
1 Flash Jumper for IO Controller flash update via Micro USB
2 DIP switches (FPGA bypass, core defined)
ARM JTAG connector for ARM IO Controller development and debugging
FPGA JTAG connector for FPGA development and debugging
ARM Debug connector for development
FPGA Expansion connector for MIDI/RS232
Requirements:
A USB keyboard
A VGA screen
Optional Requirements:
A USB mouse (for Amiga/Atari/Apple/etc)
A classic Atari style joystick
A set of PC speakers or an audio cable for connect the audio output of the MIST to a TV/HI-FI
A USB to micro USB cable for power supply, and a 500 mA micro USB phone charger (or a HUB, or and USB computer port). Power supply and micro USB cable are available as option.
Package includes:
A MIST board (revised 2k14 version) in a high quality metal case, fully assembled.
No manual included. All MIST information and instructions are available at the MIST Board Project page. Please, check too the Wiki section that contains all necessary documentation for install any core.
(No shipping charges in the US. Rest of the world...we need to discuss it.)
Revised 2k14 version in a high quality metal case, fully assembled, and ready-to-run. Click here for the MIDI version of MiST (also available at our website).
The MIST board uses modern hardware to implement classic 16 Bits computers like Amiga AGA, Atari ST(e), and 8 Bits systems like C64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, etc.
The MIST board isn't an emulation, it's a re-implementation of the original hardware in a FPGA.
Minimig Core for Amiga support ECS and AGA chipsets. Kickstart ROMs 1.2, 1.3, 2.0, 3.1 are also supported, and you will be able to load floppy disk images (ADF) and hard disk images (HDF) from the root directory or from subfolders. For more information about the installation of Amiga core, please click here.
For more information about the MIST, please visit the MIST Board Project page.
List of available Cores for MIST:
A2600
AMIGA Minimig Core
AMIGA AGA - Minimig-AGA core
Atari ST/STe and Mega STe - Mist core
Apple II+
Arcade
Atari 800
Colecovision
Commodore C64 - PGA64 Core
MSX
NES (Nintendo Entertainment System)
SMS (Sega Master System)
ZX Spectrum 48/128
ZX01/ZX81
Main Components:
Altera Cyclone EP3C25 FPGA
32 Megabytes 16 bit wide SDR SDRAM
AT91SAM7S56 ARM IO controller
MAX3421E USB host controller
TUSB2046 USB HUB
External connectors, buttons, and leds:
1 x Analog VGA output with 3*6 bits colour depth
1 x Stereo analog audio jack 3,5mm
1 x SD Card Slot
4 x USB (for keyboards, mouses, joysticks...)
2 x Classic joystick connectors (Atari's specification DB9: Amiga, Atari, Amstrad, C64, etc)
3 x LEDs (Power, FPGA and IO Controller)
3 x Pushbuttons (Board Reset, Menu, Core defined)
1 x Micro USB connector for power supply and IO Controller flash update
1 x Power Switch
Internal Connectors, switches and jumpers:
1 Flash Jumper for IO Controller flash update via Micro USB
2 DIP switches (FPGA bypass, core defined)
ARM JTAG connector for ARM IO Controller development and debugging
FPGA JTAG connector for FPGA development and debugging
ARM Debug connector for development
FPGA Expansion connector for MIDI/RS232
Requirements:
A USB keyboard
A VGA screen
Optional Requirements:
A USB mouse (for Amiga/Atari/Apple/etc)
A classic Atari style joystick
A set of PC speakers or an audio cable for connect the audio output of the MIST to a TV/HI-FI
A USB to micro USB cable for power supply, and a 500 mA micro USB phone charger (or a HUB, or and USB computer port). Power supply and micro USB cable are available as option.
Package includes:
A MIST board (revised 2k14 version) in a high quality metal case, fully assembled.
No manual included. All MIST information and instructions are available at the MIST Board Project page. Please, check too the Wiki section that contains all necessary documentation for install any core.
