My amiga 4000D tower Project

[amigat]

Here is my 2nd amiga 4000D tower project it not finished yet as i am waiting for my internal df0 floppy drive to arrive and i am saving up to buy a mediator 4000d pci busboard and cyberstorm ppc and a Indivision AGA 4000 MKII scandoubler.

So far i have a commodore 68030 running at 25mhz no fpu on a rev b motherboard with new caps and simm sockets with 2mb chip ram and 16 mb fast ram, socket superbuster 11 installed a new battery with no damage to the motherboard. I've converted the 500w atx psu for Amiga 4000 motherboard power connector and a 6 pin p9 connector for a mediator busboard when i buy one. i got 2x 12cm led fans installed 1 in the front blowing cool air into the case and the other at the back blow hot air out the back they are both very quiet when running. I got installed at the moment is a buddha /catweasel zorro card as i don't have a busboard installed yet and ide terminator on the ide on board. 3x ide harddrives, 2x amiga internal 880k floppy drives, 2x external 880k floppy drives, 1x cdrw drive ide, 5.25 and 3.5 floppy drives to the catweasel for reading pc floppys, 24gb scsi data drive, 2gb scsi jaz drive and scsi dvd rom.

Here is some hardware to be installed. deneb usb zorro card, radeon 128mb pci gfx card, pci sound blaster card.

 

[johnim]

looks nice thanks for sharing

 

[amigat]

here is some more

 

[johnim]

how heavy is it mate

 

[amigat]

about 20kg

 

[fitzsteve]

Wow that's a monster! Keep up the good work

 

[amigat]

many thanks i can't wait for it to be finished it taken me a year to get these parts so far.

Wow that's a monster! Keep up the good work

 

[fitzsteve]

many thanks i can't wait for it to be finished it taken me a year to get these parts so far.

Wow that's a monster! Keep up the good work

He he, but once you finish you'll just want to start another project so enjoy it, some of my projects have taken years and still get little mods or upgrades or even have parts swapped out for a change.

Enjoy!

Steve.

 

[amigat]

i upated some info in first thread

 

[amigat]

here is a update i have cut 2 holes in the side of the case for fans to be installed to keep the amiga cool and i cut the top main cover to 2 side panels which makes it easyer to look at the computer with out pulling or disconnecting anything. I have made my own led board for it as the leds were not seen as the tower case is on the floor. i installed my df0 floppy drive.