Sold NEW MEGACHIP PLCC version for A500/2000/CDTV!

[cugar124]

HI buddy I have a pal Angus so would only need the board put together without the angus if that helps

 

[Tuxbar81]

HI buddy I have a pal Angus so would only need the board put together without the angus if that helps

Hi,

As explained into my previous post, I'll add into the table members who already own an AGNUS chip. So if you have one, You will be into the table !

- - - Updated - - -

PM sent to CapnChaos, visery23, rainbowat, Hocks and gone2ray since their Megachip are ready for shipment !

 

[Tuxbar81]

Gone2ray has canceled is interest. PM sent to Bandaren.

 

[CapnChaos]

Payment sent

 

[Tuxbar81]

Payment sent

Payment received. Thanks a lot. Thanks a lot also to viserys23.

 

[RetroPassion]

HI!

I'm looking for 3 units excluding Agnus if available please..?

Thanks!

 

[Tuxbar81]

PM sent with tracking informations to Bandaren, viserys23, CapnChaos.
Packages will be sent this afternoon.

 

[Tuxbar81]

Packages sent to Bandaren, viserys23, CapnChaos.

 

[sordan]

Declaring interest in one with Agnus for PAL A2000.

 

[II-IRON]

Hi Tuxbar81, I now have a PAL Agnus myself, can I get the extension without the Agnus with a socket for the chip so that I don't have to solder?

mfg II-IRON

 

[CapnChaos]

Feedback left, works perfect! Thanks.

 

[Tuxbar81]

I'm really happy to hear that you have received your Megachip. I hope you'll enjoy it !
thanks a lot for you positive feedback. Positive feedback also left.

- - - Updated - - -

Hi Tuxbar81, I now have a PAL Agnus myself, can I get the extension without the Agnus with a socket for the chip so that I don't have to solder?

mfg II-IRON

I'll see. The socket for the AGNUS chip is a solution since some members already have their own chip. I'm going to order some smd sockets.

- - - Updated - - -

PM sent to blindguy and alan.turner since their Megachips are ready for shipment !

 

[XLV2K]

Interested in one (1) with Agnus for PAL A2000.

 

[blindguy]

PM sent to blindguy and alan.turner since their Megachips are ready for shipment !

Awesome!! Responded to PM and payment sent!!

 

[Tuxbar81]

Payment received. Thanks a lot !

 

[Dano]

Hi Tuxbar81, I now have a PAL Agnus myself, can I get the extension without the Agnus with a socket for the chip so that I don't have to solder?

mfg II-IRON

I'll see. The socket for the AGNUS chip is a solution since some members already have their own chip. I'm going to order some smd sockets.

First up thanks Tuxbar81, the unit works very well

Here is some information if you are thinking of installing your own Agnus in a socket:smile:

I ordered a unit a while back without a Agnus and soldered the PLCC SMD socket on so I could easily re-use the Agnus.

Installed in my 2000

There is a little bit of fitting involved as the A20 line is a little high and you need to file a groove in the PLCC socket corner (blue circle next picture) so the SMD socket will sit flush. Probably could also use a thinner line if you did not want to weaken the socket with the groove.
A little bit of fitting required in the blue circle area.

 

[sagias]

Want one without agnus i have 3 pieces.

 

[ErinW]

Interested in one without Agnus for NTSC A500. Thanks!

 

[Tuxbar81]

First up thanks Tuxbar81, the unit works very well

Here is some information if you are thinking of installing your own Agnus in a socket:smile:

I ordered a unit a while back without a Agnus and soldered the PLCC SMD socket on so I could easily re-use the Agnus.

View attachment 161643Installed in my 2000

There is a little bit of fitting involved as the A20 line is a little high and you need to file a groove in the PLCC socket corner (blue circle next picture) so the SMD socket will sit flush. Probably could also use a thinner line if you did not want to weaken the socket with the groove.
View attachment 161644A little bit of fitting required in the blue circle area.

Hi Dano,

Thanks a lot for your post and your pictures.

 

[blindguy]

Got Mine!! Super fast shipping to the US!!

Looks perfect - taking my A2000 apart and will test over the weekend.

Will Leave Positive Feedback.

Great stuff!!