Picasso Graphic PCB for A500 - A2000 - A4000 - GBA1000. 1st Batch

  • Thread starter Thread starter Tuxbar81
  • Start date Start date
  • Replies Replies 200
  • Views Views 49912
Status
Not open for further replies.
for the GBA1000 expansions, we have paid 5.38€ for the GPU (20 GPU ordered), 2.03€ for one memry IC (4 needed) and around 9€ for the Xilink.
The last time I have ordered GPU, I have paid 10€ but for only 5 units.
More units we order, less will be the price... normally!
 
Picasso Graphic PCB for A500 - A2000 - A4000 - GBA1000. 1st Batch

Ok Tuxbar, add me for the components for when i get a pcb hopefully. Thanks
 
Last edited:
Tuxbar81, if it's not problem for you, give my two PCB's to other guys. I decided to not build it.

Sorry for this.

JanciB
 
@Tuxbar81

Do you have the project files (schematics, eagle, jedec) of the rev 2.6 board to share?
 
my Picasso2 with components in kit or assembled

if found other money, i order a 060 for gba
 
Hi ya Tuxbar, did you get my pm, I bet your swamped at the moment just wanted to make you got it :-)
 
Was there a BOM list of parts published for this version of the board? Which .jed files to use?
 
I'll send the schematics and the BOM this evening.
For the JED, file, I have contacted Matthias.
The JED file needs do be modified since Matthias has changed the pin out of the Xilink.
I'll give you as soon as he will have modified it.
 
Here are the needed Parts including digikey-partnumbers exept the RAM and the Cirrus-Chip:

View attachment Partlist.zip

The Cirrus is a

CL-GD5434-QC-F

Für RAM you can use SEC

KM416C256BJ-6

Or equivalent.

It must be 60ns or faster!

JED will come soon!
 
Last edited:
MatthiasH,

I'm working on adding Mouser and Newark/Element14 Part Numbers to the list for North American/Canadian Sources. I should have it done by 20:00 EST today.

Shaf
 
Thank you!

Be aware, that R8 should be just a 0Ohm-Bridge and C11 can be ommited!

IC8 should be TI LM3334M(X) and NOT LM334SM(X).

Best regards
Matthias
 
Hello Everyone, as promised attached is the US/CDN part list.
The Mouser Part List is completed but Newark/Element14 is done. I have also noticed a lot of DigiKey Parts are not available in North America.
View attachment Partlist.zip

Note: Partlist updated to include more Mouser Parts. Jan 18,15 20:28 EST
 

Attachments

Last edited:
Status
Not open for further replies.
Back
Top Bottom