For Sale PSU replacement enclosure for Amiga 3000D pre-order

[arymanx]

I wonder if anyone may be interested in PSU replacement enclosure. I made initial batch of 5pcs for a few friends.
Please be aware that this is serious DIY project, will require soldering also on high voltage site.
Price to be determined depends on quantity but should be in region of 80 GBP (plus postage) if I get 10 orders.

Creating this enclosure was possible thanks to Niezgodka who kindly sent me original PSU for measurements.

Kit will include (please see pictures) (02.10.2023 update to clarify, included are: stainless steel enclosure, switch, 3d printed button, IEC socket, 6x FDD splitter, TICK module[on blue PCB] plus 6pin plug, 3d printed insulating base for FSP250-50GUF, 3d printed stuffing gland) :





This module is included. It provides TICK signal (programmed on request 50 or 60Hz) and -5V via LDO from -12V.











These pictures are for visualization purpose only. Fully assembled unit.








Pictures below are thanks to Rkolodziej who kindly shared it with me.











1. Marinero70 (1pc + PSU) (delivered)
2. anightin (1pc + PSU) (delivered)
3. kavanoz (3pcs + 3x PSU) (delivered)
4. nyteschayde (1pc + PSU) (delivered)
5. sunmax (1pc + PSU) (delivered)
6. Wrangler (1pc + PSU) (delivered)
7. prosonic (1pc + PSU) (delivered)
8. simon_m74 (1pc + PSU) (delivered)
9. RioBandit (2pcs + 2x PSU) (delivered)
10. milo (1pc + PSU) (delivered)
11. Robert_G (1pc + PSU). (delivered)
12. StanMoonie (2pcs) (delivered)
13. utukku (2pcs + 2x PSU ) (delivered)
14. tmoschella (1pc) (delivered)
15. darkfather242 (1pc) (delivered)
16. RetroPanic (1pc) (delivered)
17. samoht (1pc) (delivered)
18. RetroPanic (delivered)
19. Davka (delivered)
20. trixter (delivered)
21. josephgut (delivered)

Batch 2

22. CodePoet (delivered)
23. Toaster4000 (delivered)
24. RKolodziej (delivered)
25. Nowee (delivered)
26. alexscotti (delivered)
27. RobA1200 (delivered)
28. josephgut (delivered)
29. dingebre (delivered)
30. Floppie209 (delivered)

Batch 3

1. Sumselbrumsel 50Hz (delivered)
2. akuehnemund 60Hz (no reply)
3. nickrb 60Hz (delivered)
4. Bruce72 50Hz (delivered)
5. MadMungo 50Hz (delivered)
6. BITbyBIT 2pcs 60Hz (no reply)
7. wowjesstfc 60Hz (delivered)
8. jeff_hanna 60Hz (delivered)
9. michol 2pcs 50Hz (delivered)
10. Bit-Image 60Hz (delivered)
11. Karl_Retro32 50Hz (delivered)
12. dawgtool 60Hz no reply
13. akuehnemund 60Hz (delivered)
14. qz3fwd 60Hz (dispatched)


Batch 4 (pre order)

1. nekonoko (delivered)
2. Adi81 (delivered)
3. outside Amibay 2pcs (delivered)
4. dawgtool (delivered)
5. orwinjpo (delivered)
Price change 84GBP (plus 12GBP for FSP250-50GUF if required, only one FSP250-50GUF available at this moment)
4 available


Questions/Answers
1. May I ask what will be required to have a complete power supply besides what will be provided in the kit?

a. Flex 1U PSU as a donor. I recommend FSP250-50GUF (used in demo model). I sourced a few used and can add to the kit for additional 8 GBP (no warranty provided). Also mounting holes are present for SFX Thermaltake SL-8220SFX, ASTEC ATX93-3415 and FSP FSP300-60GHS (85), but I did not test it.
I think other types of SFX may be used but will require drilling and tapping in the base plate.

b. Two fans are required 80mm 12V 3pin and 40mm 5V 3pin.
example of compatible 80mm fan Noctua 3pin
example of compatible 40mm fan Noctua 3pin 5V

c. 15 pin connector
15 pins/lugs

d. some wires

2. What wires go where?

Review of PSU enclosure replacement by Wrangler:

and another by Chris Edwards Restoration:

 

[RandomInexperiencedGuy]

Declaring interest.

including the FSP250-50GUF part too please

---

(Marked as sold/completed by arymanx)

 

[SukkoPera]

May I ask what will be required to have a complete power supply besides what will be provided in the kit?

 

[anightin]

Declaring interest.

---

Declaring interest

---

(Marked as sold/completed by arymanx)

 

[arymanx]

May I ask what will be required to have a complete power supply besides what will be provided in the kit?

Please see updated post.

 

[kavanoz]

Declaring interest.

---

I would order one with a FSP250-50GUF as I have a case in need of a PSU.

---

(Marked as sold/completed by arymanx)

 

[nyteschayde]

Declaring interest.

---

Declaring interest. Please supply FSP250-50GUF and any other parts. Would like to see this as quiet as possible. Let me know if Noctua fans are compatible

---

(Marked as sold/completed by arymanx)

 

[sunmax]

Declaring interest.

---

Wonderful!

Interested in 1 kit (including FSP250-50GUF).

PM sent

---

(Marked as sold/completed by arymanx)

 

[anightin]

Declaring interest.

---

Declaring interest

Forgot to mention — would like a FSP250-50GUF too please along with the kit

 

[Wrangler]

Declaring interest.

Including the FSP250-50GUF part too please, 50 Hz Tick signal

---

(Marked as sold/completed by arymanx)

 

[prosonic]

Declaring interest.

---

Declaring interest.

including the FSP250-50GUF part too please

---

(Marked as sold/completed by arymanx)

 

[simon_m74]

Declaring interest.

---

declaring interest including the FSP-250-50GUF
Tick to be 50Hz please

---

(Marked as sold/completed by arymanx)

 

[RioBandit]

Declaring interest.

---

declaring interest for 2 with FSP250-50GUFn and any other fancy fans or whatever will make it better. You Rock!

---

(Marked as sold/completed by arymanx)

 

[milo]

Declaring interest.

declaring interest for 1 with FSP250-50GUFn.

---

(Marked as sold/completed by arymanx)

 

[DocLeisure]

Declaring interest.

---

for a fully assembled unit, including the FSP250-50GUF part, 50 Hz Tick signal, fans, etc.

---

(Interest withdrawn here)

 

[arymanx]

Declaring interest.

---

for a fully assembled unit, including the FSP250-50GUF part, 50 Hz Tick signal, fans, etc.

I do not offer a fully assembled units. I can get for you required items but you will have to build it yourself.

 

[Robert_G]

Declaring interest.

---

(Marked as sold/completed by arymanx)

 

[kavanoz]

@arymanx I’d like to get 2 additional units (for a total of 3) with the used PSU if available.

 

[DocLeisure]

Interest withdrawn. (was previously declared here)

Sorry, I have to withdraw my interest. I am not able to solder, crip cables and assable the unit myself ;-(

 

[StanMoonie]

Declaring interest.

---

declaring interest in two enclosures with 60hz tic.

---

(Marked as sold/completed by arymanx)