Radeon 9250 128MB PCI

[Bamiga2002]

Have no use for this card anymore. I have tested it with my Mediator TX + OS 3.9/4.0 and it worked good. Since no Warp3D for classics for this card, it's bye bye time.

Bought as new and seen very little use, included all in original box: install disc (for PC), instructions :roll: and VGA-to-DVI adapter.

Price 25€ + p&p. Paypal or IBAN.

 

[portarinos]

Interested if this is the right version for my SAM440ep. Can anybody confirm?

 

[Tajmaster]

Interested if this is the right version for my SAM440ep. Can anybody confirm?

It needs to be a 3v card (2 notches in the connector) for the SAM, this card is a 5v one so I doubt it will work.

 

[portarinos]

This is why i'm asking. I was aware of the 3v vs 5v feature but i couldn't figure out which version this card really is. If the seller can confirm what Taj just wrote then, in this case, i drop my interest.

 

[Bamiga2002]

Can't test in any NG machine myself because I don't have one . Where can I check the voltage?

 

[merlinkv]

If the card is not modified, this one is a 5v version.

 

[roy_bates]

the saphire radeon 9250 are dual voltage.

as others have said,you can tell by the two notches.

 

[Bamiga2002]

It's a Club Radeon 9250. Postage to Greece 2,5€.

 

[portarinos]

So, we can tell the voltage by the notches. In case there are three of them,i should be looking at a 3.3v version or not?

 

[johnim]

the club radeon i have for my mediator had to be modified for 3.3v to work in the mediator

 

[Tajmaster]

Just to be clear, the card for sale in this thread is a 5v PCI card and will not work with the SAM.
For an example of a 3.3v card and the notches in the connector that have been discussed above, please see the attached pic of one of my own cards

 

[portarinos]

Thanks mate. I appreciate the time you took to shoot these photos.

 

[Tajmaster]

Thanks mate. I appreciate the time you took to shoot these photos.

 

[Bamiga2002]

Sold with Mediator in another thread, can be closed.