Sold Replacement 1084 Power Switches

[mrr19121970]

Declaring interest in one set. Sending pm

Gesendet von meinem HTC One_M8 mit Tapatalk

@Deninho 1 set. paid, posted & awaiting feedback

 

[Exit]

im interested in one set...are they still available?

i have send you a pm..

 

[mrr19121970]

im interested in one set...are they still available?

i have send you a pm..

Awaiting payment

 

[Exit]

updated: i payed you

 

[mrr19121970]

Correct, see 1st post. 9 euros for 1 set. 14 euros for 2 sets, 19 euros for 3 sets. etc etc.

Price
Asking 9 euros including international postage (as a letter - no tracking no insurance & your risk) for 3 switches. Additional sets of 3, please add 5 euros.

Payment
PayPal family'n'friends only

Interest
Please register interest here and PM me too

@Exit. 1 set. paid, posted & awaiting feedback

 

[Microfinne]

Hi, interested in one set.

 

[mrr19121970]

Hi, interested in one set.

Hi, I didn't get a PM from you. I will contact you directly.

 

[mrr19121970]

@Microfinne. 1 set. paid, posted & awaiting feedback

 

[hoojii]

Hi, intrested.

 

[mrr19121970]

Hi, intrested.

Awaiting payment

Update

1 set. paid, posted & awaiting feedback

 

[Deninho]

Power switches received. Positive feedback left.
Cheers!

Gesendet von meinem HTC One_M8 mit Tapatalk

 

[mrr19121970]

There are plenty of switches available

 

[K1ngarth3r]

Update
It is a really easy repair. Remember if you do this and you are injured or damage your monitor, I am not responsible. Make sure you unplug the monitor from the mains, and don't touch anything inside the machine except the plastic. Unscrew 5 screws on the back. Slide off the back panel. Unplug the "molex" connector for speaker and put back panel to one side. Disconnect 4 wire "molex" connecting the mainboard to power board. Underneath the monitor is a small hole. You can see a tab on the power board. Press this in and slide out the power board. Now you can unscrew the on/off switch and desolder the 4 tabs. Remove the plastic collar from the old switch, put it on the new switch. Solder the 4 wires back on the tabs (front power cable, back power board), screw on/off back in place. Slide power board back in position. Connect power board "molex". Connect speaker "molex". Slide back-panel back on. Replace 5 screws. See video here for more details https://youtu.be/x8QM-TQ0ghA

Just a quick question.

I would say it's good practice to discharge the monitor from the anode cap before attempting any work inside a monitor.

For those using a screw driver and crocodile clip where are you guys getting the grounding?

 

[Marduk_17]

Hi,

Declaring interest in a set of three switches for delivery to Australia.

 

[mrr19121970]

Hi,

Declaring interest in a set of three switches for delivery to Australia.

Awaiting payment. I will pm you

 

[mrr19121970]

@Marduk_17. 3sets. Paid, posted & awaiting feedback

 

[Marduk_17]

Thank you very much,

All items received!

 

[rootboy]

Interested, PM to follow.

Money sent.

 

[mrr19121970]

Interested, PM to follow.

Paid, posted & awaiting feedback

 

[raparici]

Interested in one set with delivery to Spain