Replacement Sockets for Amiga Motherboards

[bitcpy]

Anyone know a good source for replacement sockets for Amiga motherboards?

I need a socket for a Denise chip for an Amiga 3000. I am not sure what the correct pitch is for the pins.

Any help would be appreciated.

Thanks in advance.

 

[roy_bates]

its just a standard 48 pin DIL socket isent it?

if you cant find any you could always use strip pins,also as far as i know all dil sockets have the same pin pitch.

 

[TheCorfiot]

Roy_Bates suggestion is the best advice,

Get your self a stock of turned pin socket strips and you are then prepared for all chip sizes, even the 68000

the turned pin type give superior low resistance contact too.

TC

 

[bitcpy]

Thanks for the input guys.

I was really hoping to replace with the same socket type to keep the board looking original. I am trying to help a friend with a corroded Denis socket so I was hoping for an easy desolder/solder of the same socket.

I found a supplier of the sockets, but, they have many different pitches and I wasnt sure which one was correct.

 

[roy_bates]

http://www.ebay.co.uk/itm/1-PC-48-P...al_Components_Supplies_ET&hash=item4ab4e406a3


like this one?


if TC could be so kind as to confirm pitch and distance between rows, as i dont have my vernier gauge on me at the moment.

 

[cpiace64]

i have many of this, but 3 week to arrive to canada

 

[bitcpy]

Thats basically it.. The A3000 doesnt use the style with the round holes, but, I wont be that picky. lol..

I found one on Element14 but I just wanted to confirm the pitch.

http://canada.newark.com/te-connect...cket-ic-dil-48way/dp/99K0885?in_merch=Popular Products

These guys are local to me and I can have it in 1 or 2 days.

http://www.ebay.co.uk/itm/1-PC-48-P...al_Components_Supplies_ET&hash=item4ab4e406a3


like this one?


if TC could be so kind as to confirm pitch and distance between rows, as i dont have my vernier gauge on me at the moment.

I appreciate it, but, I dont think he will want to wait that long for his Amiga to be fixed.

i have many of this, but 3 week to arrive to canada

 

[rkauer]

All Amiga DIL chips have the very same standard 1/10" pitch (that's 0.254mm in new money).

 

[bitcpy]

Wonderful. Thank you. The 2.54mm pitch is the one that I found but wanted to confirm it was the right one.

All Amiga DIL chips have the very same standard 1/10" pitch (that's 0.254mm in new money).

 

[Bad_Ad84]

2.54mm not 0.254mm

 

[bitcpy]

Yes. Sorry..

See what happens when you copy paste.. lol..

These guys have a 2.54mm pitch connector.

http://canada.newark.com/te-connect...cket-ic-dil-48way/dp/99K0885?in_merch=Popular

2.54mm not 0.254mm