Price: $235USD plus shipping, add $20USD for heat-sink/fan combo.
Item: 68060 "weirdos", multiple available
UPDATE: This batch is now closed and marked as sold. After inventory, I only had Qty.7 8 of these "weirdos" on-hand.
Note: If declaring interest in multiple CPUs, you must specify the Quantity you are interested in! When declaring interest, please confirm if you want a heatsink/fan or not (best suited to A4000D fitment).
Each CPU comes in a plastic jewel case with ESD foam, in an anti-static bag, in a box, in a padded mailer.
Each CPU has been drop tested via a ZIF socket ($$) in a TF4060 board ($$), boot tested into Amiga Test Kit, and reports as a genuine rev6 CPU. CPUs have also passed RAM test runs.
Multiple happy customers of these units, including FPU tests using POV RAY. Will let them comment in the thread at their discretion.
Heatsink/fan is added cost, blue is slightly taller than yellow, please specify.
Note: There is no guarantee about overclocking, and the parts have not been speed binned for higher clock speeds. There is variability depending on the accelerator used, the (over) voltages provided, CPU cooling, and the system you put it in. I recommend the TF1260/TF4060 family of accelerators as they provide fine-grained control of clock-speed, as opposed to some other accelerators with fixed multiples like 50/100MHz.
Note: These were likely full rev6 68060 CPUs but badged as LC or EC for some commercial buyer, and have since been relabeled (not by me) with a fictitious mask number. You can see this from the font used, and the printing/spacing. Thus the lower price.
Note: If declaring interest in multiple items, you must specify the Quantity you are interested in!
Note: Also listed elsewhere
Note: If you're interested in the heatsink/fan combo, I do not have spares to sell individually. However, they are made by Wakefield Thermal. In the US, I purchased these off of Newark:
Proof of ownership not required for this listing, based on seller rating.
Thank you for your interest!
Item: 68060 "weirdos", multiple available
UPDATE: This batch is now closed and marked as sold. After inventory, I only had Qty.
Note: If declaring interest in multiple CPUs, you must specify the Quantity you are interested in! When declaring interest, please confirm if you want a heatsink/fan or not (best suited to A4000D fitment).
Each CPU comes in a plastic jewel case with ESD foam, in an anti-static bag, in a box, in a padded mailer.
Each CPU has been drop tested via a ZIF socket ($$) in a TF4060 board ($$), boot tested into Amiga Test Kit, and reports as a genuine rev6 CPU. CPUs have also passed RAM test runs.
Multiple happy customers of these units, including FPU tests using POV RAY. Will let them comment in the thread at their discretion.
Heatsink/fan is added cost, blue is slightly taller than yellow, please specify.
| CPU ID | Amibay User | A4000 Heat Sink / Fan (Y/N) | Payment Received | Tracking Provided |
| 1 | grizaptimus | Y | Yes | Yes |
| 2 | witchdoctor75 | N | ||
| 3 | steveed | N | Yes | Yes |
| 4 | n/a (Discord) | N | Yes | |
| 5 | n/a (Discord) | Y | Yes | Yes |
| 6 | ctrlbreak | Y | Yes | Yes |
| 7 | xanxi | Y | Yes | Yes |
| 8 | rabidgerry | N | Yes | Yes |
Note: There is no guarantee about overclocking, and the parts have not been speed binned for higher clock speeds. There is variability depending on the accelerator used, the (over) voltages provided, CPU cooling, and the system you put it in. I recommend the TF1260/TF4060 family of accelerators as they provide fine-grained control of clock-speed, as opposed to some other accelerators with fixed multiples like 50/100MHz.
Note: These were likely full rev6 68060 CPUs but badged as LC or EC for some commercial buyer, and have since been relabeled (not by me) with a fictitious mask number. You can see this from the font used, and the printing/spacing. Thus the lower price.
Note: If declaring interest in multiple items, you must specify the Quantity you are interested in!
Note: Also listed elsewhere
Note: If you're interested in the heatsink/fan combo, I do not have spares to sell individually. However, they are made by Wakefield Thermal. In the US, I purchased these off of Newark:
- https://www.newark.com/wakefield-thermal/hsf-48-30-y-f/heat-sink-fan-0-83deg-c-w-5-9cfm/dp/58AC8237 (30mm tall)
- https://www.newark.com/wakefield-thermal/hsf-48-25-y-f/heat-sink-fan-0-98deg-c-w-5-9cfm/dp/58AC8233 (25mm tall)
Proof of ownership not required for this listing, based on seller rating.
Thank you for your interest!
Last edited:
