Riser card for Amiga 500

  • Thread starter Thread starter krisbA
  • Start date Start date
  • Replies Replies 28
  • Views Views 4953
Status
Not open for further replies.

krisbA

Member
Rating - 100%
8   0   0
Joined
Feb 1, 2013
Posts
69
Country
Poland
Region
Radlin
Buy Riser Card A500 90st for Amiga 500 changing the position of the processor by 90 degrees. I have the ability to transfer Kickstart bones to a card. Useful for the installation of processor cards that hardly fit under the keyboard. Costs 18.00 euros plus shipping cost in Europe 4.50 euros. I have 15 cart for sale. Sending a shipment can be tracked here: http://emonitoring.poczta-polska.pl/


RiserA500TF1.jpgRiserA500TF2.jpg

RiserA500TF3.jpgRiserA500TF4.jpg
RiserA500TF5.jpg

 
Last edited:
I am interested in buying. Do you think it will work with a kipper2k A508 board i have.
 
the kickstart rom IC notch mark IS ON THE WRONG SIDE! or am i totally crazy? You will possibly damadge your rom placing ii this way...
 
This is the error so this part is solderless. You have to do it right everyone on your own. Improved functionality will be in rev 1.5.
You just need to solder the cradle properly. According to how it is on Amiga.
On PCB you can sell goldpins to IC1 (Kickstart Kickstart on PCB Amiga 500) and Kickstart to IC2. On Risers PCB, however, the direction is wrong. You need to put Rom like the Amiga board. This can be tracked down the paths. You can do this but you have to do it carefully. Due to the error will not offer this functionality. If so, I will help.
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom