Closed Sega Megadrive 2, Mega CD 2 & Master System 2 with games

  • Thread starter Thread starter -Acid-
  • Start date Start date
  • Replies Replies 18
  • Views Views 3795
Status
Not open for further replies.

-Acid-

Active member
AmiBayer
Rating - 100%
222   0   0
Joined
Nov 15, 2010
Posts
4,392
Country
England
Region
South Shields
I am sellling my Sega Megadrive 2 and Sega Mega CD 2. The Mega CD comes in it's box which has the inner tray in good condition, the plastic block and another metal plate to fit the original megadrive on to it is also in the box. Both power supplies are included and a video lead. Two pads and an arcade stick are included and have all been tested, the six button pad has a slight rattle but works fine in SF2.

Road Avenger and Sega Classics Arcade Collection cd games are included, boxed have seen better days but they are complete with instructions. The cartridge games included are Sonic Spinball, Sonic the Hedgehog 2, Populous, The Lion King, Aladdin, Mercs and Street Fighter 2 Championship Edition (box and spine damaged). All have instructions except Mercs and the front page is missing on the SF2 manual.

Also we have a Master System 2 with psu, rf lead and one controller. Alex Kidd is built in and this is the only game I have for it.

I'm looking for £65 plus shipping - bank transfer or paypal (gift or fees).
 

Attachments

  • Imgp0434.jpg
    Imgp0434.jpg
    71.7 KB · Views: 7
  • Imgp0437.jpg
    Imgp0437.jpg
    26.9 KB · Views: 7
  • Imgp0438.jpg
    Imgp0438.jpg
    50.1 KB · Views: 6
  • Imgp0787.jpg
    Imgp0787.jpg
    76.5 KB · Views: 5
  • Imgp0788.jpg
    Imgp0788.jpg
    96 KB · Views: 4
  • Imgp0790.jpg
    Imgp0790.jpg
    69.1 KB · Views: 6
  • Imgp0791.jpg
    Imgp0791.jpg
    67.2 KB · Views: 7
  • Imgp0793.jpg
    Imgp0793.jpg
    121.7 KB · Views: 4
Last edited:
Could you check the motherboard revision of the MD2?

Or maybe a pic of the underside of the unit which shows how far across the motherboard goes (it will be full width or 3/4 width).
 
Could you check the motherboard revision of the MD2?

Or maybe a pic of the underside of the unit which shows how far across the motherboard goes (it will be full width or 3/4 width).
I'll have a check tomorrow night for you
 
Could you check the motherboard revision of the MD2?

Or maybe a pic of the underside of the unit which shows how far across the motherboard goes (it will be full width or 3/4 width).
The metal shielding goes all the way across the console, if that helps?
 
Can a mod please change the title to Sega Megadrive 2, Mega CD 2 & Master System 2 with games

@thread I've added some bits and altered the price accordingly. If there is no interest by Thursday I will ebay the lot.
 
Could you check the motherboard revision of the MD2?

Or maybe a pic of the underside of the unit which shows how far across the motherboard goes (it will be full width or 3/4 width).
The metal shielding goes all the way across the console, if that helps?

Thanks for checking, not the model I'm after. Good luck with the sale...
 
Could you check the motherboard revision of the MD2?

Or maybe a pic of the underside of the unit which shows how far across the motherboard goes (it will be full width or 3/4 width).
The metal shielding goes all the way across the console, if that helps?

Thanks for checking, not the model I'm after. Good luck with the sale...

If you're looking for a VA3 or VA4 revision then just looking at the metal shielding through the vents is not enough... I've come across MD II's with full size shielding that still use the smaller VA3/VA4 motherboards.
 
The metal shielding goes all the way across the console, if that helps?

Thanks for checking, not the model I'm after. Good luck with the sale...

If you're looking for a VA3 or VA4 revision then just looking at the metal shielding through the vents is not enough... I've come across MD II's with full size shielding that still use the smaller VA3/VA4 motherboards.

Thanks, that's good to know - second person I've seen mention that.

Although it's a lot easier for prospective sellers to check than actually checking the PCB....
 
Hmm so it will be 88 Pounds with postage.....have to check my finances for the month to come....
 
Status
Not open for further replies.
Back
Top Bottom