Closed Spectrum IDE Hard Disk Adapter R3.1D

  • Thread starter Thread starter Zetr0
  • Start date Start date
  • Replies Replies 152
  • Views Views 24566
Status
Not open for further replies.
Hello ZetrO,

I'm interested in one interface including ROMs if it's still available

PS:I actually don't own a speccy.
Which model do you advice for gaming ?
I would like to get a good picture but I know that some models don't have the RGB output ?

Thanks in advance
 
Hi ZetrO,

if there are any devices left I would love to have a complete one with all romstuff and wires for my recently bought 128K +3

cheers
 
Some CF cards do not present themselves properly to the ATA Bus, as such completely confuse the IDE adapter. I have the same problem with a faulty Lexmark 2GB CF Card.

Cheers, you were absolutely right - Lexmark 4GB no way - Kingston 512MB, fine and dandy!

Right, now I need to format it and get some software on there!
 
I'm way late to the party here but I would be interested in one of these if they ever become available
 
Dear Zetr0,

since you don't respond on PM or in this topic, might it be better to wait for your z80sdmmc? I dont mind waiting a little.

cheers
 
I´m late like hell, but I´m also declaring interest in one adapter plus an NMI. My +3 has already been equipped with the +3e ROMs. Would be great to get such adapter.
 
Thread Update

Thread Update

Sorry guys had some crappy internet so now its time to catch up.


I'm pretty sure the limit is 2GB - I haven't tried plugging anything bigger than that in.

Definitely worth trying to get hold of a 2GB card from somewhere.

I have to update my previous statement, Originally I stated that the maximum limit was 2TB, while the OS can handle this, the physical limit of C/H/S addressing means only 128GB is the limit.

So you can have absolutely no more than Two Million, seven hundred and ninety six thousand, two hundred and two (point 6) 48k Snapshots =)


Hi Zetr0,

Any news about my order?

- 1 x ZX Spectrum IDE 3.1D complete pack (with +3e ROMs, NMI button, cable)

- 20 x W27C257 PROMS

- 1 x Spectrum 128 +2AB / +3 RGB SCART Cable (you have bought for me at Tech-Shack)

I'm waiting your news.

:coffee:

I spoke again with the post office on Saturday, I will PM you shortly.

Hi Zetro,

is an adapter available for me and my 48+?

thanks

yes - please see bottom post

Hi Zetro,

is an adapter available for me and my speccy 48+?

thanks

yes - please see bottom post

Hi Zetr0,
I´m interested in one unit to my +3e, there still one available?
I have +3e V1.38 divIDE roms, they are compatible or I must aquire new roms?
Thanks in advance

Yours was posted late Saturday,

Hi Zetr0,

I requested a full package from you for my Speccy 128 +2AB quite a while ago and was just wondering if it fell through your radar?

I don't mind waiting, as you said you need to ensure others already have received theirs :thumbsup:

Yours was postage late Saturday

Hi, zetr0 hope you are feeling better?
I'm also still interested in one of these. Should I pm you or are none left.
Greetings

I do have some left

Hello ZetrO,

I'm interested in one interface including ROMs if it's still available

PS:I actually don't own a speccy.
Which model do you advice for gaming ?
I would like to get a good picture but I know that some models don't have the RGB output ?

Thanks in advance

In my humble opinion I love the +2AB (Black with cassette) it really is cool to have cassette and harddisk in the same machine - or course money no object I would have a modified +3 motherboard inside a +2AB case (with cassette) and modify it to have a cassette IN (which only need a resistor and a header added ) with two external Black Floppy Drives, 1x 720kb 3.5" and the other a 3" 140k drive. both drives switch-able for either Drive A or B.

That would be my ultimate want (interestingly I have all the bits here to make that magic happen too ;))

Hi ZetrO,

if there are any devices left I would love to have a complete one with all romstuff and wires for my recently bought 128K +3

cheers

yes, I can help.

Hi ZetrO,

Any Adapters left? I'm interested in one for +2 (Grey)....

Thanks!

yes - please see bottom post

I'm way late to the party here but I would be interested in one of these if they ever become available

Dear Zetr0,

since you don't respond on PM or in this topic, might it be better to wait for your z80sdmmc? I dont mind waiting a little.

cheers

Hello fratzengeballer, patience is your perview my friend, but it is www.tech-shack.com that will hopefully be selling these end of Feb / March time.

There are some compatibility issues with some software, I have noted that Attic Attack, Alien 8 and the Dizzy series 4 through 7 simply crash and have graphic glitches. I am yet to isolate as to why this is the case but I suspect a byte drift somewhere in loading.

This issue is prevailent in both Snapshots as well as files.

Both of these file types work with either a 16bit IDE interface (like the DivIDE in passive 3e mode) or the 8bit IDE device.

I´m late like hell, but I´m also declaring interest in one adapter plus an NMI. My +3 has already been equipped with the +3e ROMs. Would be great to get such adapter.

I can certainly help.

Currently there are no +3e features for the NMI button. However I do plan to write some rom-able software (FDISK and FileBrowser) in the future for the +3e ROM

Dear ZetrO,

What's the status of available adapters? Any left?

Thanks!

Yes I do. I have put aside some for those still outstanding, if they do not receive their items by Weds next week I will ship these out to them - express post so they are covered.


For use with the 48k / 128k / 128k +2 Grey

This adapter is a little more involved as you will need to prepare your IDE disk using Pera Putniks DrvImg program, I plan on doing a how-to for this.

At the moment I have not tested this, and as far as I am aware it only loads and saves snapshot files, the latter the NMI feature is use.

I plan to have a play with this as soon as I get some time and a Spectrum + or 128 that doesn't mind being a victim.

for more information have a read here
 
Hi Zetr0,

Did you ever post my 2 adaptors out, or are these included in your latest shipment, as I never received anything?

Thanks again,

Jamie.
 
Hello Jamie, I thought that you had received these my friend,

I will send out some more since I have put some aside.
 
Hi Zetr0.

Just caught up with this thread here again after some time away from Amibay :roll:
I see you posted it late saturday, seemingly the 20th January? Where and how did you post it? It's the 29th today and still nothing received?

The postal service must be really bad these days. :mad:
 
Sorry Guys,

Suffering the flu here, I will get on top of this asap.

I have contacted royalmail by phone and they have not been able to give me any answer as to why. I have raised a complaint (Whatever that means). I have all the receipts so in the worse case scenario I will just claim those. I have enough IDE's to cover those not with their owners.

However until I know everyone is sorted out. I cannot sell any more adapters.
 
Since mine has been on route since december 22nd, one start to wonder what they are up to at Royal mail... :picard
 
@thread

Out of the 6 parcels sent 4 have not turned up.

These 6 parcels were sent from my local post office. I have contacted royal mail, but sadly they have given me the standard claim form. Fortunately I have enough to cover these 4 packages

I am very meticulous with receipts so I have been assured that along with evidence of transactions (yay paypal)

Currently drinking a lot of lemsip and printing out new postage labels - I will be taking these direct to the depot in the morning.

Truly sorry guys...
 
Thanks for the update Zetr0. It's very frustrating when Royal Mail claim they know nothing.

Let's hope it gets sorted out. It's just suspicious they can lose so many people's parcels! :picard

PS. Get well soon mate. I had that nasty virus for 3 weeks over xmas and it wasn't fun. Now it seems it's doing a 2nd round here at work again with half our staff sick!
 
@update

Sorry for the delay guys, been some what sleeping off this multitude of infections.

Today I finished going through all the orders and those that have not received it.



I am completely out of NMI cables and buttons and CF to IDE adaptors =(


I have only 3 IDE adapters and enough for 3 sets of +3 ROM's left and IDE cable.
 
Status
Not open for further replies.
Back
Top Bottom