Closed (Super) Socket 7 motherboard w/ min. 4x ISA

  • Thread starter Thread starter Lennart
  • Start date Start date
  • Replies Replies 7
  • Views Views 2417
Status
Not open for further replies.

Lennart

Member
AmiBayer
Rating - 100%
21   0   0
Joined
Apr 26, 2010
Posts
145
Country
The Netherlands
Region
Utrecht
As my current Socket 7 motherboard seems to have died (by my own fault :banghead:), I'm looking for a replacement. This is what I'm looking for:

- Socket 7 or Super Socket 7, with support for a Pentium 233MMX CPU
- DIMM memory slots
- Preferably ATX form factor, but AT will do as well
- A minimum of 4 ISA slots, but even more would be better :)

It doesn't necessarily have to come with CPU and RAM already installed.

Should you happen to have such a board and you'd like to sell it, please get in touch. :)
 
I`m not sure but I might have some socket7 Mobos knocking around, if no one else shouts up give me a nudge, pm, next week
 
I have some but max they have is 3 isa slots (P2 slot) and a mini socket 7 with only 2 isa slots (as an amd k6-2 333mhz).
 
I have some but max they have is 3 isa slots (P2 slot) and a mini socket 7 with only 2 isa slots (as an amd k6-2 333mhz).
Thank you for looking, but I'm really after a (Super) Socket 7 motherboard with at least 4 ISA slots. I used 4 old ISA soundcards in my previous setup and I'd like to continue using them with a new board. :)
 
Hi Lennart,

I have just such a motherboard: 4xISA, 4xPCI, 2xDIMM+4xSIMM sockets, AT-PSU, Intel 430VX chipset, 512KB cache, USB 1.x, Award BIOS, (Super?) Socket 7, and supports up to 75MHz bus with 3x multiplier (P5-MMX@233MHz). It's a Soltek/Flashtech SL-54A5 (http://stason.org/TULARC/pc/motherboards/F/FLASH-TECH-INC-Pentium-SL-54A2-S-SL-54A5-S.html). It was a spare board and thus very clean. I can include a P5-MMX@200MHz, battery, cables for floppy/serial/parallel,IDE.

I'll send you a PM as well.

Cheers!
 
Status
Not open for further replies.
Back
Top Bottom