testing the a4000 D stupid question

[jvdbossc]

I am installing the DENEB USB, the manual states do not put it in the zorro slot the wrong way, but you can, what is the good way? solder down to the motherboard and components to the sky?

sorry poor amiga owner before..

 

[Templar]

I had a Deneb card before, and I don't remember that you could insert it in the wrong way. Insert it as other normal cards.

 

[jvdbossc]

txs,

txs,

I have no normal cards..

---------- Post added at 16:33 ---------- Previous post was at 16:33 ----------

the card can be down and up.. it is not like pci or isa...

 

[keropi]

1 picture = 1.000 words

 

[jvdbossc]

ok, had it proper at first then in doubt.

ok, had it proper at first then in doubt.

was thinking like put it like this in the zorro board then:

http://www.elbox.com/products/extra_prod/mediator_pci_4000di.html

would be wrong.

---------- Post added at 17:03 ---------- Previous post was at 16:52 ----------

put it in linke the picture, installing software! That comes with it

 

[arnljot]

1 picture = 1.000 words

I know it's just not me: but this is HOT!

 

[rkauer]

1 picture = 1.000 words

That's a very nice A3000 you have, Ker!

 

[keropi]

1 picture = 1.000 words

That's a very nice A3000 you have, Ker!

no amigo, 'tis not mine... I just searched to find a pic of an installed DENEB to help out jvdbossc

 

[jvdbossc]

it did help

it did help

yes it is installed, have another question know, but fits in new top.

this can be closed.

 

[rkauer]

Non-commercial threads don't need to be closed, mate.

 

[Kin Hell]

1 picture = 1.000 words

I know it's just not me: but this is HOT!

Yeah. It looks good m8, but I hope you ain't rubbing anything, ....while looking. :jester:

Kin

 

[jvdbossc]

clockport

clockport

think i found out the clockport orientation question myself, found some chematics online, stating the first pins have + 5 volts so used a multimeter.. Nothing burns, but not tested the catweasel. Post images today.. The leftover is 4.8 volts :dry: And it confirims to the 20 label..

 

[jvdbossc]

ok the promised pictures

ok the promised pictures

It is still not the way I wan't it, but well early stage of config: (yes I noticed that I should glue the catweasel less drunk (i glued it in without looking at it from the back)

I will paint the case, it looks yellow..No probs with that part I am better in painting than putting parts in

I installed the 68040 card, had the scandoubler in, the usb, the catweasel..

Not finished, I am better in dreaming then in realising











After formatting the cf in the real amiga, i decided to use winuae, wondering if anybody else thinks it is slow, compared to the real thing

 

[rkauer]

<SNIP>
I will paint the case, it looks yellow..No probs with that part I am better in painting than putting parts in
<SNIP again>

http://retr0bright.wikispaces.com/

 

[jvdbossc]

ok

ok

might be the thing to do - will pm a chemist about Hydrogen Peroxide for the translation in Dutch and to check I can get it.

 

[arnljot]

Just go to your local pharmacy. It's a scientific name they understand. In norwegian it's Hydrogen peroksid. So in duch I guess it's hyjdrogën paroksjidj....

 

[jvdbossc]

can do that

can do that

I alway's check when mixing such products with someone. It can save your life..