Found TK030V2 for A500 with MC6830RC50 and FPU
- Thread starter uunek
- Start date
- Replies 8
- Views 384
- Status
@8 Bit Dreams is not actively offering TK030V2 cards in his sale threads.
Was your purchase based on the offer @8 Bit Dreams made in this thread to another member?
Was your purchase based on the offer @8 Bit Dreams made in this thread to another member?
@davideo
User have seen my offer Here:
He created his own wanted thread and asked me about these cards via PM - deal was agreed, payment received, prepare shipment now
User have seen my offer Here:
Yes, haven't listed 68030TK V2 accelerators because these are a bit "specific".. Unlike other accelerators these need nice and crisp Adressline signals. It isn't working on early rev.3 and rev.5 machines if RP106 & RP107 pull-ups are not installed. Some rev.6 and rev.8.1 are also not working if burned Eproms are used.. This makes usage of it a bit complicated, yet I guess I have a solution soon:
Have drown some Flashroms with pullups on them, so it'll be solderless solution hopefully..
Last edited:
These are needed only if Your machine doesn't boot and gives a red screen..
I've included two 4.7k resistor network arrays in Your package, so You can fix that:
Should be RP106 & RP107.. My rev.8.1 doesn't boot with V2 If These are Not installed..
I've included two 4.7k resistor network arrays in Your package, so You can fix that:
Should be RP106 & RP107.. My rev.8.1 doesn't boot with V2 If These are Not installed..
Last edited:
- Status
