Trapdoor for Amiga 1200

[SkyLarkEire]

Trapdoor arrived - great thing. Now I will be sure there is enough air-flow inside of my Amiga 1200.
Positive feedback left.

Payment received. Will ship tomorrow.
EDIT: the package is now shipped.

 

[anemo]

Trapdoor arrived - great thing. Now I will be sure there is enough air-flow inside of my Amiga 1200.
Positive feedback left.

Payment received. Will ship tomorrow.
EDIT: the package is now shipped.

Thank you! Enjoy your cool(er) Amiga!

 

[anemo]

No trapdoors available at the moment

 

[knoid]

No trapdoors available at the moment

Declaring interest in case you print more of these!

 

[anemo]

No trapdoors available at the moment

Declaring interest in case you print more of these!

Thank you for your interest! I will probably get a new batch in 3-4 weeks.

 

[troubleshooter]

I am interested as well..... Let me know when you have more to sell.. Thanks

 

[TjLaZer]

Has one been developed for the Apollo 1240 accelerator?

 

[anemo]

Has one been developed for the Apollo 1240 accelerator?

I'm not too familiar with the Apollo 1240. Is the SIMM module on the bortom protruding alot? The ventilated part is only 2mm thin so it doesn't steal so much space.

 

[anemo]

New batch on the way. Will probably be available in a week or so.

 

[modrobert]

Declaring interest.

 

[anemo]

Declaring interest.

Thank you, I will PM you when new batch is ready.

 

[anemo]

Trapdoors are back in stock!

PM:ed knoid, troubleshooter, TjLazer and modrobert.

 

[troubleshooter]

Sent PM.. Thanks

 

[anemo]

Sent PM.. Thanks

Payment received.

EDIT: Package shipped

 

[modrobert]

Payment sent.

 

[anemo]

Payment sent.

Payment received.

EDIT: Package shipped.

 

[TjLaZer]

Anyone with an Apollo 1240 or Phase 5 Blizzard 1260 use these trapdoors? Want to make sure it will fit. Simms are flat not angled.

 

[ori1a]

Anyone with an Apollo 1240 or Phase 5 Blizzard 1260 use these trapdoors? Want to make sure it will fit. Simms are flat not angled.

Any trapdoor require some cut to be used with Apollo 12x0. I have different trapdoor, but had to cut: entire rectangle for simm, rectangle hole for oscillator and hole for battery.

Wysłane z mojego ASUS_Z00AD przy użyciu Tapatalka

 

[anemo]

Anyone with an Apollo 1240 or Phase 5 Blizzard 1260 use these trapdoors? Want to make sure it will fit. Simms are flat not angled.

You could check the clearance measuring like this:

 

[nonamez78]

Declaring Interest for two parts. PM follows immediately .