Closed Various sound cards (ISA and external midi)

  • Thread starter Thread starter sepultribe
  • Start date Start date
  • Replies Replies 21
  • Views Views 3649
Status
Not open for further replies.

sepultribe

New member
Rating - 100%
1   0   0
Joined
Aug 18, 2012
Posts
20
Country
greece
Region
athens
looking for any of the following (in somewhat reasonable prices i hope given the current situation)

soundblaster 1.0/1.5/2.0
soundblaster pro 1.0/2.0
roland LAPC-I/MT-32/CM-32L/CM-64
roland scc-1/sc-55
DB50XG/DB60XG/NEC XR385
gravis ultrasound
mpu-401 compatible cards with intel. mode

please pm me or respond here if you have any of these for sale

dimitris
 
Last edited:
Hi. I have SB PRO 2.0, Gravis Ultrasound Classic fully upgraded with ram, DB50XG and mpu401 interface Music Quest MQX-32M. Interested?
 
I am sure you already know it but some of the cards you are looking for make some in your wish list unnecessary:

LAPC-I : int.mode mpu401 + cm32L in an isa card , you need the MCB-1 breakout box though to connect external devices
SCC-1 : int. mode mpu401 + sc-55 in an isa card, no breakout box needed
there is also the Yamaha SW-60 which is a standalone DB-60XG in an ISA card, no external mpu capabilities though... has an onboard mixer to mix it's sound with another device (sb)
;)
 
Last edited:
I am sure you already know it but some of the cards you are looking for make some in your wish list unnecessary
yes i'm not looking to acquire all of them, just the ones i can find, that is why that list has a lot of redundant cards ;)

LAPC-I : int.mode mpu401 + cm32L in an isa card , you need the MCB-1 breakout box though to connect external devices
isn't the MCB-1 just a DB15-to-Midi converter that can be self made as a cable too?

thanks for the info on sw60, didn't know it existed. i will search for it if i cannot find anything else
 
nope , the mcb-1 is not as simple as the sb-midi cable for example... if I find my pic of it I'll link it here... there are several components inside, a couple of ICs... maybe they are related to the metronome/tape connectors, maybe they are used also for the midi ports... no idea
 
Last edited:
The MT-32, SC-55, CT1350 and CT1600 are the most common out of all off your desires. eBay DE usually has a good supply. Good luck! :)

The MCB-1 is also relatively common.

This is where I keep track of sound cards for sale:
http://www.vintage-computer.com/vcforum/showthread.php?23432-Sound-Cards-For-Sale-Tracker

Another good lead tracker:
http://www.vogons.org/viewtopic.php?f=5&t=34088&sid=d8c6712a2b90da93a9beef47151f12bf&start=900

SoftMPU can also replace hardware intelligent MPUs.

You can also email / phone every music store in GR / CY. That is how I got lots of cards (& could have gotten even more modules). :)
 
Last edited:
Exactly: I have recovered LAPC-Is, MPU-401ATs, RAP-10s, MPU-IPC-Ts, CM-32Ls and so on from music stores. They sometimes have it stored in cabinets, their warehouse and unless someone asks forgot about it.
 
Not the best quality but you can tell what is what. The SB Pro 2.0 is still in my Pentium Pro machine, so i'll have to remove it.

WP_20140120_001_zps129b6ff2.jpg
 
Last edited:
thank you for taking the time to take pictures altho you are in bad health. hope you are doing better now.

they look very good and i am sure they are all in working condition

whenever you are ready i will send you the money. do you accept paypal gift or want some other way?
 
Is a SC-55 MK1 of interest to you? great condition and working perfect.
 
Status
Not open for further replies.
Back
Top Bottom