Videohybrid Kits (VIDIOT)

  • Thread starter Thread starter crasbe
  • Start date Start date
  • Replies Replies 36
  • Views Views 8022
Status
Not open for further replies.
C

crasbe

New member
Rating - 100%
5   0   0
Joined
Nov 23, 2012
Posts
42
Country
Germany
Region
NDS
Hello there,

I'm offering 60 videohybrid replacement kits.
They can be used to replace a broken videohybrid or for the GBA1000. They are equivalent to revision -03.

IMG_20140730_164035_2.jpgIMG_20140730_173043_2.jpgIMG_20140730_173254_2.jpg

Please check the parts on arrival:
Code: 
100nF Kerko      -  [FONT=Arial]without marking, brown ceramic[/FONT]
MMBT3904 NPN     -  [FONT=Arial]marked[/FONT] 1AM5/1E
MMBT3906 PNP     -  [FONT=Arial]marked[/FONT] 2AZ

2x   36 Ohm      -  [FONT=Arial]marked[/FONT] 36R0
8x   75 Ohm      -  [FONT=Arial]marked[/FONT] 75R0
2x  220 Ohm      -  [FONT=Arial]marked[/FONT] 2200
3x  390 Ohm      -  [FONT=Arial]marked[/FONT] 3900
3x  470 Ohm      -  [FONT=Arial]marked[/FONT] 4700
1x 13k3 Ohm      -  [FONT=Arial]marked[/FONT] 1332
1x  150 Ohm      -  [FONT=Arial]marked[/FONT] 1500
4x   1k Ohm      -  [FONT=Arial]marked[/FONT] 1001
3x   2k Ohm      -  [FONT=Arial]marked[/FONT] 2001
3x   4k Ohm      -  [FONT=Arial]marked[/FONT] 4001
1x 6k04 Ohm      -  [FONT=Arial]marked[/FONT] 6041
1x   8k Ohm      -  [FONT=Arial]marked[/FONT] 8061
[B]1x 19k6 Ohm      -  [FONT=Arial]marked[/FONT] 1962[/B]
1x  27k Ohm      -  [FONT=Arial]marked[/FONT] 2702
2x 37k4 Ohm      -  [FONT=Arial]marked[/FONT] 3742
[B]1x 90k9 Ohm      -  [FONT=Arial]marked[/FONT] 9092[/B]

Pricing:
2,50€ for 1 kit
1,50€ for 1 spare pcb

3,70€ for shipping in Europe/worldwide
Bank transfer and PayPal only!

If you want to sell the kits (soldered or not) again rightaway, please keep in mind, that I do this in my spare time with next to no profit!

I hope, I haven't forgot anything...

Greetings,
crasbe
 

Attachments

Last edited:
Hi, I could use some for my GBA1000 and spares. I can solder them myself. Please send me a PM with payment details for four kits :)
 
Hello Crasbe,

i am not interested, but can you explain the third picture on your post? There is some black columns on the kickstart screen.

Regards
Stefano
 
Oh, yes. I forgot that one... That's a faulty Denise in my test-A500+.

I don't know, how to proof it... I crosstested it with the Denise of my GBA1000 and there are no columns present.
 
I am using crasbe's videohibryd on my GBA1000 and also soldered those kits on a friend's GBA1000 and it's working perfectly.
 
Both orders are waiting in the post office for they're journey to Finland ;)
It'll start in about 25 minutes.
 
You know, that a kit includes PCBs?

You'd order (in total) 2 kits and 4 PCBs. Just for information.
 
Yes I know. I have a few A500's and a GBA1000. Ordering the PCB's in case I biuld a 2nd GBA1000. Currently building a Rev1 Board and waiting on the Rev 4 Board.
 
I forgot to mention it: Please check all resistor-values. Especially the black marked ones in the table.

If you have wrong values, nothing will be damaged, but the picture will look somewhat ugly ;)

Edit: Of course, I will ship the correct resistors for free.
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom