Craziazkowboi
Member
TF536: $300 now $225AUD + shipping I also have a relocated for an extra $15AUD.
GBAPII++:$300 now $225AUD + shipping
(About $150USD or $140Euro each).
I do have a Zorro adapter I could sell if needed, or get one here: https://amigatronic.com/AMYA500Z2-p531711029
A TF536 50MHz, 68030 accelerator with MMU, no FPU. It has 64Mb RAM and IDE (44 pin connector). It has been running perfectly in an Amiga 1000 and a Phoenix Amiga. Compatible with Amiga 500, A500+, 1000, 2000. May need the relocator to fit the keyboard on,
This card was made by AlenPPC in Canada, and is the buffered version of the TF536, which I found to be more stable for IDE transfers. AlenPPC also provides support for his TF536 cards Reading the TF536 page BEFORE purchasing is recommended (and also sells cards here on Amibay):
Hardly any use, works perfectly. Selling because I have another card (TK2) with an FPU for development purposes that I use. No games use the FPU so it is a waste outside of development purposes.
----------------------------------------------------------------------------------------------------------------------------------------------------
A GBAPII++/PicolloSD64 Zorro II graphics card for Amiga 500 (*with Zorro Adapter), 1000 (*with Zorro adapter) 2000, 3000, 4000, or Phoenix Amiga.
*Zoroo adapter not included in sale.
RTG graphics card based on the exceptionally fast (For the time) Cirrus Logic GD5434, and has the cut out to make it an A500 version if desired)
Basic information
64 bit blitter
2MB on-board graphics RAM
Picasso96 compatible
Screen Modes
640×480 24 bit/100Hz 16 bit/200Hz 8 bit/260Hz
800×600 24 bit/65Hz 16 bit/120Hz 8 bit/120Hz
1024×768 16 bit/75Hz 8 bit/100Hz
Will automatically switch between RTG and native Amiga video screen modes if you have an ECS Indivision or a scandoubler/flicker fixer card.
Selling because I have already have one and decided not to upgrade a second Amiga. The card is from https://amiga68k.com/?product=piccolo-sd64-clone
- Swiss made, gold dipped traces, very high quality made board.
The card has not had much use and it works perfectly in my Phoenix Amiga, as can be seen from the P96 Speed screenshot. Much faster/better than the original PicassoII board.
TF536: $225AUD + shipping
+$15AUD with CPU Relocator
GBAPII++: $225AUD + shipping
+$50AUD with Amya500z lite
(About $150USD or $140Euro each for the cards).
bump.
GBAPII++:
(About $150USD or $140Euro each).
I do have a Zorro adapter I could sell if needed, or get one here: https://amigatronic.com/AMYA500Z2-p531711029
A TF536 50MHz, 68030 accelerator with MMU, no FPU. It has 64Mb RAM and IDE (44 pin connector). It has been running perfectly in an Amiga 1000 and a Phoenix Amiga. Compatible with Amiga 500, A500+, 1000, 2000. May need the relocator to fit the keyboard on,
This card was made by AlenPPC in Canada, and is the buffered version of the TF536, which I found to be more stable for IDE transfers. AlenPPC also provides support for his TF536 cards Reading the TF536 page BEFORE purchasing is recommended (and also sells cards here on Amibay):
TF536 Info and Installation - alenppc's TerribleFire support page
You can buy the TF536 on Amibay or RetroKit Australia.
alen.dreamhosters.com
Hardly any use, works perfectly. Selling because I have another card (TK2) with an FPU for development purposes that I use. No games use the FPU so it is a waste outside of development purposes.
----------------------------------------------------------------------------------------------------------------------------------------------------
A GBAPII++/PicolloSD64 Zorro II graphics card for Amiga 500 (*with Zorro Adapter), 1000 (*with Zorro adapter) 2000, 3000, 4000, or Phoenix Amiga.
*Zoroo adapter not included in sale.
RTG graphics card based on the exceptionally fast (For the time) Cirrus Logic GD5434, and has the cut out to make it an A500 version if desired)
Basic information
64 bit blitter
2MB on-board graphics RAM
Picasso96 compatible
Screen Modes
640×480 24 bit/100Hz 16 bit/200Hz 8 bit/260Hz
800×600 24 bit/65Hz 16 bit/120Hz 8 bit/120Hz
1024×768 16 bit/75Hz 8 bit/100Hz
Will automatically switch between RTG and native Amiga video screen modes if you have an ECS Indivision or a scandoubler/flicker fixer card.
Selling because I have already have one and decided not to upgrade a second Amiga. The card is from https://amiga68k.com/?product=piccolo-sd64-clone
- Swiss made, gold dipped traces, very high quality made board.
The card has not had much use and it works perfectly in my Phoenix Amiga, as can be seen from the P96 Speed screenshot. Much faster/better than the original PicassoII board.
TF536: $225AUD + shipping
+$15AUD with CPU Relocator
GBAPII++: $225AUD + shipping
+$50AUD with Amya500z lite
(About $150USD or $140Euro each for the cards).
bump.
Attachments
Last edited:
