3D printed Amiga cases

[Sgw32]

How about designing the CD32 case?

Hi. Now I can say it is "Work in progress"


NEWS:

- I published Amiga 4000 3d print/laser cutting model

Commodore Amiga 4000 case 3d print and laser cutting model | 3D Print Model

Model available for download in DXF format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

- Some time ago Amiga 2000 3d print/laser cutting model was published:

Amiga 2000 reproduction case 3d model | 3D Print Model

Model available for download in Stereolithography format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

- Finally, the Amiga 1200 enclosure:

https://www.cgtrader.com/3d-print-models/gadgets/pc-laptop/commodore-amiga-1200-enclosure (the only one released in plastic by me, see photos)

Coming soon:
Amiga 2000/4000 keyboard enclosure
Amiga CD32
Commodore 1541

 

[btp]

Looking great!
Are you actually buying all this hardware to create your models?

 

[Sgw32]

Looking great!
Are you actually buying all this hardware to create your models?

Yes, thats how it works. I buy new cases/computers and redraw them

 

[btp]

I suppose if you want your models to be accurate there's no other way.
Still getting an A4000 is quite expensive nowadays!

 

[Sgw32]

I suppose if you want your models to be accurate there's no other way.
Still getting an A4000 is quite expensive nowadays!

A4000D was from my friend. I still hope to get A4000T

 

[CD32freak]

Impressive! I'm eagerly awaiting the CD32 case. Thank you for all your hard work in making this possible!

 

[Amilord]

Awesome !

Someone tried to get an A4000D case printed by JLC3DP ?

 

[Lord_protector]

Id like a full tower in the commodore A4000T style to build from scratch , if possible of course.

 

[Boing-ball]

Id like a full tower in the commodore A4000T style to build from scratch , if possible of course.

@Ordyne Is currently making a new A4000T replicant case.

 

[Lord_protector]

Sweet i have a 4kd custom pc tower but would like to build a 4kt with original parts of repro boards and the original commodore case as a show piece .

 

[Boing-ball]

Sweet i have a 4kd custom pc tower but would like to build a 4kt with original parts of repro boards and the original commodore case as a show piece .

Follow the build going on:

A4000T Replica

So the A4000 desktop case seems to be well received, I'm still working on small improvements to it, I've not finished working on it or making cases my any means. I'm still working on the front covers and I still want to push to get them injection moulded if there is enough interest, I got a bit...

www.amibay.com

 

[Sgw32]

CD32 case is finished and will be released this week

New model:

• Amiga 4000 keyboard enclosure

Amiga 4000 keyboard 3d printed enclosure | 3D Print Model

Model available for download in Stereolithography format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[CD32freak]

Awesome! Did you use a 3D scanner to design it or did you do it all manually?

 

[Sgw32]

Awesome! Did you use a 3D scanner to design it or did you do it all manually?

It is redrawn only using caliper, unfortunately, I do not have 3d scanner and I tried it several times, results were not that impressive, though also helpful.

 

[Tbsnc99]

Hi there if I wanted a clear amiga 500 or 1200 case how much would these cost please. Also any plans for the cd 32? Regards Shaun

 

[Sgw32]

Hi there if I wanted a clear amiga 500 or 1200 case how much would these cost please. Also any plans for the cd 32? Regards Shaun

Hi.
For cd32 I will release files soon and make calculations as well.
Regarding A1200 I have a black case available, however now I need it. The same case ordered now shows around 220 EUR.
If clear means transparent, it costs around 290 EUR.

 

[Sgw32]

My black case with motherboard
Above there was a photo with a keyboard from A500 assembled

 

[Tbsnc99]

What 3d printer are you using?

 

[Sgw32]

What 3d printer are you using?

Anycubic Chiron, Anycubic I3 Mega X - previously I used them, now I use them only for prototyping, mainly I use Chinese printing services

 

[qz3fwd]

Hi.
For cd32 I will release files soon and make calculations as well.
Regarding A1200 I have a black case available, however now I need it. The same case ordered now shows around 220 EUR.
If clear means transparent, it costs around 290 EUR.

For that kind of cost wouldn’t it make more economic sense to order an injection molded 1200 case for significantly less? Or are you targeting colors not avaliable? I have a translucent purple 1200 case on order. Not sure I would trust a 3D printed case.