Closed A2000 & A500 keycaps etc

  • Thread starter Thread starter BLTCON0
  • Start date Start date
  • Replies Replies 22
  • Views Views 685
Status
Not open for further replies.
Well, these A2000 keys can be made to fit (they're Mitsumi type) but:
1) The colour and feel of these is distinctly different (these are the non-yellowing white keys with a somewhat rough, grainy surface, not the smooth, somewhat shiny type used in the A500 and A1200).
2) The stem at the underside of the keys is a bit different from that of A500/A1200 keys, thus it will not clip perfectly unless the supporting key "sleeve" is changed for the A2000 version as well. I probably have a few of the matching sleeves, but note that you will be needing to take apart the whole keyboard.
3) The cutout keys from Left Shift and Enter, coming from a German layout keyboard, are not blank as in the US/UK versions.

So this may end up not being an ideal fix. I still have a few A500 keys that would fit better, and Andylandy also offers here some genuine A1200 keys, you might want to look that up too :thumbsup: Let me know.

EDIT: yep, I found exact replacements: Left Shift + blank right cutout and Enter + blank lower-left cutout from an A500+ keyboard, only thing they're a bit yellowed and may require an H2O2 bath.

---------- Post added at 20:32 ---------- Previous post was at 19:24 ----------

Left Amiga from A500 keys taken by chapas.
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom