A500/A2000 Automatic Kickstart Switcher - New project!

  • Thread starter Thread starter Tuxbar81
  • Start date Start date
  • Replies Replies 736
  • Views Views 111773
Status
Not open for further replies.
Hi Tuxbar81,

I only saw your message today. I use to check this thread very often but more or less slowed down after almost giving up on waiting for it. Tried to reply to your PM but your mailbox is full. I still want one and hope you can take my payment ASAP. Do consider the fact that a lot of us waited a long time for this switcher and I had no other business at Amibay so almost gave up waiting. If I don't have to wait for the switcher now, I'll arrange payment immediately once you've sent me word. Apologies for the confusion. If we can take this conversation via PM, that'll be much appreciated.
 
Hi Tuxbar81,

I only saw your message today. I use to check this thread very often but more or less slowed down after almost giving up on waiting for it. Tried to reply to your PM but your mailbox is full. I still want one and hope you can take my payment ASAP. Do consider the fact that a lot of us waited a long time for this switcher and I had no other business at Amibay so almost gave up waiting. If I don't have to wait for the switcher now, I'll arrange payment immediately once you've sent me word. Apologies for the confusion. If we can take this conversation via PM, that'll be much appreciated.

Hi ajack,

What you say surprises me little lit. In fact, I have sent the PM to you (and to specialK, scoobytgb, veper and multivac) the 17th march at 8:45 AM. You have read this PM the same day at 8:59 AM... And I know that you have visited Amibay, I'm not going to say each day, but almost...
If you weren't able to pay when you have received the PM, no problem, you could simply send me a PM to ask me to wait...

You have to keep in mind that I'm not a factory (if I was a factory, the price would not be the same...). I make everything with my little hands. And the payments that I receive are used to produce new PCBs or tyo buy components.

Yesterday, I wasn't at home, but I have seen that someone has sent a payment. I assume that it's perhaps you.
I think that you can understand that I can't accept your money now since I have set in place some rules to allow members who are waiting to have their switchers and me to have money to buy new PCBs and components.

Regards,
Franck.
 
Hi Tuxbar81,

I only saw your message today. I use to check this thread very often but more or less slowed down after almost giving up on waiting for it. Tried to reply to your PM but your mailbox is full. I still want one and hope you can take my payment ASAP. Do consider the fact that a lot of us waited a long time for this switcher and I had no other business at Amibay so almost gave up waiting. If I don't have to wait for the switcher now, I'll arrange payment immediately once you've sent me word. Apologies for the confusion. If we can take this conversation via PM, that'll be much appreciated.

Hi ajack,

What you say surprises me little lit. In fact, I have sent the PM to you (and to specialK, scoobytgb, veper and multivac) the 17th march at 8:45 AM. You have read this PM the same day at 8:59 AM... And I know that you have visited Amibay, I'm not going to say each day, but almost...
If you weren't able to pay when you have received the PM, no problem, you could simply send me a PM to ask me to wait...

You have to keep in mind that I'm not a factory (if I was a factory, the price would not be the same...). I make everything with my little hands. And the payments that I receive are used to produce new PCBs or tyo buy components.

Yesterday, I wasn't at home, but I have seen that someone has sent a payment. I assume that it's perhaps you.
I think that you can understand that I can't accept your money now since I have set in place some rules to allow members who are waiting to have their switchers and me to have money to buy new PCBs and components.

Regards,
Franck.

I not sure why, maybe because I have this page PINned in Firefox and I may have done a refresh and missed it. :(

In any case, I really want one unit (from my previous two units) with the extension cable. Please let me know when it is ready. I've now just reinstalled TapTalk so hopefully it alerts me without me missing it again. :(

Sorry for the confusion again.

PS. Can I just pay you for it now and you send to me when it's done, I really don't want to miss it again.
 
Last edited:
No reply... :/

Actually, no time to spend for that.
I didn't update the table since members don't answer to my PM. (the delay of one week is passed since some days... PM sent the 24 & 25 of march...)
I'll try to make the update this evening... and swap members.

I have seen just that you have send my 40 € for two ribbon Kickstart switchers... and the amount for one is 21€. And we'll have to add the shipping costs which can be estimated only when the parcel is made.

Regards.
 
PM me the outstanding and I'll send that across to you as soon as possible.

Sent from my Note 2 using Tapatalk...
 
Hello Tuxbar,

Can you give me an update, please?

My request has already has some time now.
Thanks
 
Hello Tuxbar,

Can you give me an update, please?

My request has already has some time now.
Thanks

A member here has made me losing my time. I hope you're not going to be the new one...
You have asked me when your switcher will be ready. And I have answered here:

https://www.amibay.com/showthread.php?60790-A500-A2000-Automatic-Kickstart-Switcher-New-project!&p=685327&viewfull=1#post685327

I have asked for your email when you have send the post. Email which will be used to inform you when your switcher will be ready. You remember? The post is here:

https://www.amibay.com/showthread.php?60790-A500-A2000-Automatic-Kickstart-Switcher-New-project!&p=686487&viewfull=1#post686487

You want an update. Right, here it is:

You are into the second table which is of the NEXT batch. The NEXT batch will start only when the first one will be closed.
If you are too eager for waiting quietly, I think that the best way for you is to withdraw your interest and to try to find a second hand of any other switcher.

Thank you for you understanding.

- - - Updated - - -

For information, I have ordered components for the switchers.
One parcel is arrived, and the second one that I'm waiting for isn't arrived, and I don't know when it will be...
The components were ordered from the same seller. The second order is arrived, and strangely, the first one has been sent and if not arrived.

One of the components that I'm waiting for are the gold 40 round pin header strip used to connect the switchers to the motherboard.

I just hope that it has not be lost by the post...
 
Last edited:
Hello Tuxbar,

Can you give me an update, please?

My request has already has some time now.
Thanks

A member here has made me losing my time. I hope you're not going to be the new one...
You have asked me when your switcher will be ready. And I have answered here:

https://www.amibay.com/showthread.php?60790-A500-A2000-Automatic-Kickstart-Switcher-New-project!&p=685327&viewfull=1#post685327

I have asked for your email when you have send the post. Email which will be used to inform you when your switcher will be ready. You remember? The post is here:

https://www.amibay.com/showthread.php?60790-A500-A2000-Automatic-Kickstart-Switcher-New-project!&p=686487&viewfull=1#post686487

You want an update. Right, here it is:

You are into the second table which is of the NEXT batch. The NEXT batch will start only when the first one will be closed.
If you are too eager for waiting quietly, I think that the best way for you is to withdraw your interest and to try to find a second hand of any other switcher.

Thank you for you understanding.

- - - Updated - - -

For information, I have ordered components for the switchers.
One parcel is arrived, and the second one that I'm waiting for isn't arrived, and I don't know when it will be...
The components were ordered from the same seller. The second order is arrived, and strangely, the first one has been sent and if not arrived.

One of the components that I'm waiting for are the gold 40 round pin header strip used to connect the switchers to the motherboard.

I just hope that it has not be lost by the post...


Hello Tuxbar,

When I ask/commit to something, I do not back away. So, if I asked for the switch, I will not be "the new one wasting your time..."

I just asked because it had been a while since any contact and I can to the forum from time to time. Nothing more.
Regarding mail, I have sent it to you by private message, at the time. Did you receive it?

Thank you for the update.

Best,
Muad_dib
 
Hi Muad_dib,

Yes, I have received your mail. I'll send you a message when your switcher will be ready. :-)
 
Hello Tuxbar,

I resurrected my childhood Amiga 500 in March and among the repairs and refurbishment I have been conducting, I've been unsuccessfully searching for venues which sell kickstart switchers :huh:. The other day I stumbled across Amibay and your kickstart switch thread :wooha: :bowdown: and so have registered here! Amibay looks like a great place. :D

Are you still accepting requests for the switcher? If so please can I declare my interest for one "Ribbon Version" kickstart switchers suitable for a standard Amiga 500/500+?


Best wishes
IceEagle
 
Hello Tuxbar,

I resurrected my childhood Amiga 500 in March and among the repairs and refurbishment I have been conducting, I've been unsuccessfully searching for venues which sell kickstart switchers :huh:. The other day I stumbled across Amibay and your kickstart switch thread :wooha: :bowdown: and so have registered here! Amibay looks like a great place. :D

Are you still accepting requests for the switcher? If so please can I declare my interest for one "Ribbon Version" kickstart switchers suitable for a standard Amiga 500/500+?


Best wishes
IceEagle

Hello IceEagle,

Welcome here into the Amibay community!

I'm happy that you have repaired your Amiga! It's always a good news to hear that an Amiga is came back from the dark! :-)
Yes, if you want, I can add you into the table for the second batch.

Best regards.
 
Hello IceEagle,

Welcome here into the Amibay community!

I'm happy that you have repaired your Amiga! It's always a good news to hear that an Amiga is came back from the dark! :-)
Yes, if you want, I can add you into the table for the second batch.

Best regards.

Hello Tuxbar,

Thanks for the quick reply! Yes so far she's running smoothly.. hopefully I won't make too many errors to change that :roll: The Amibay community may sway me to further modifications too...

So pleased to hear I can be added to the second batch table, best news I have had all weekend!! :) Please include me for one of the ribbon style ones which can fit the A500 case.

Best wishes,
IceEagle
 
Hello Tuxbar,

Thanks for the quick reply! Yes so far she's running smoothly.. hopefully I won't make too many errors to change that :roll: The Amibay community may sway me to further modifications too...

So pleased to hear I can be added to the second batch table, best news I have had all weekend!! :) Please include me for one of the ribbon style ones which can fit the A500 case.

Best wishes,
IceEagle

Hello IceEagle,

I add you into the table! :-)

Best regards.
 
Eight Kickstart Switcher are ready & fully tested.

I'm going to send PM to

beholder for 1 switcher
AXm77
for 2 switchers
AG_DK
for 2 switchers
Diego77777
for 1 switcher
Neraka
for 2 switchers

beholder & AXm77 have never answered to the PM that I have sent to them the 03/24/2015.
If I have no answer from them one week after the PM that I'll send this evening, their switchers will go to another members.
 
Status
Not open for further replies.
Back
Top Bottom