For Sale A500 IDE adapters, PS/2 mouse adapter, A600 CF adapter

[britlord]

Deleted...

 

[djos]

Folks, Kipper and I (and possibly others) are offering a Bounty over at EAB for an updated KickStart v1.3 patch for A500's using Kippers or MKL's A500 IDE expansions:

http://eab.abime.net/showthread.php?t=77782

 

[mkl]

Does the patched rom work in A600?
A1200 Rom 680(EC)20 code does not necessarily run on 68000.

 

[djos]

Does the patched rom work in A600?
A1200 Rom 680(EC)20 code does not necessarily run on 68000.

yes the current patched ROM works fine on a600's, just not a500's (ECS & OCS).

 

[voyager_1701e]

Pleased to say I "assembled" my first V402 board and it worked "straight out of the box"...how pleased I am

+ve feedback coming of course.

Cant help with the 1.3 ROM issue...I used 2.05 and 3.1

 

[papa_november]

Just got mine in the mail and it works, another satisfied customer!

 

[Mustang]

I'm interested in two V402 ide68k boards with CF adapter for the A500.

 

[Moonlight]

Do you have a A500 IDE hard disk adapter?

read post and I see 600/1200 ... if you have an IDE for the A500 Rev5 NTSC I am interested

if not I do thank you for your time

Moonlight (Glen)

 

[mkl]

Hi. Two v402 (with special idecf adapters) and one cfidecpv297 for sale. V297 needs a riser socket in rev5 because the ksrom is closer.

 

[Pumkin_Duke]

Hi, I'm interested in one of the v402 with special idecf adapter.

Payment sent.


Update: withdrawn from purchase.

 

[mkl]

Hi. Two v402 (with special idecf adapters) and one cfidecpv297 for sale. V297 needs a riser socket in rev5 because the ksrom is closer.

v297 won't fit with https://www.amibay.com/showthread.p...cb-with-places-for-two-plcc-29f040-byte-flash KSROM adapter board, only standard dip ic clears the ide board. maybe a v298 could be made, where board dimension is made smaller. Also the CF header at the back should be brought tighter towards 68000 in order not to be so close to denise chip.

The www page may be down soon for a while, so I think i'll post the documents in zip/lha, here or aminet doc/hard.

 

[embedder]

Is this thing still available?

1 pcs: V402 with surface mount parts soldered and cpld programmed and board tested (no dip-64 socket nor 40-pin ide connector soldered nor included) 30 euros includes shipping (*)

If yes: declaring interest.

 

[embedder]

Having a deal, money sent.

 

[embedder]

Board received, will leave feedback.
Many thanks for this quick delivery!

 

[vash999]

You still have pcs Completed V402 ide68k boards price 45 euros (no tested boards in stock)
thx.

 

[mkl]

i have 2 pcs v402 adapters fs.

 

[digisoft]

MKL

Do You be so kind upload You's www page on zip file or attach v402 schematic, pcb png's jed and abel file.

Best regards

 

[IanFromAfrica]

I bought one of these boards recently (v297 with CF adapter) and now that I am trying to install it I see Mika's website is "404" (ie. no longer exists). Does anyone have the wiring diagram to connect the /OVR and /INT2 signals? I have emailed Mika, but am asking here in case he doesn't reply (near future or ever). TIA

 

[IanFromAfrica]

I got this info from Mika via email:

> the cf is powered by the adapter.
> the pins are int6, int2 and ovr, left to right when looking the top side of
> adapter so that pins are "upside" (cf slot at left.)"

It would be a good idea if Mika put the installation instructions in clear English in the first message of this thread. I just got this via email from him:

> Correction to last word. Right hand side, not "left"

Anyway, it did install correctly, autoboots etc., so I'll leave these (rather scant) instructions here if anyone needs them.

 

[mkl]

I'll upload a copy of www page tomorrow.