Closed A600 / A1200 recap service
- Thread starter mjnurney
- Start date
- Replies 111
- Views 27014
- Status
Hi my friend.
I have one A1200 dead and an A600 3.1 with ACA620 but EasyNet doesn't work and I don't have any other pcmcia hardware to test it. On another A1200 works fine. I copied A1200's WB to A600 just incase I did something wrong with the settings but no luck. Do you think it is a socket problem?
@crazyegg
working on your boards now - soaking in lemon juice at the mo - they caps have leaked a lot on the 600.
@ taj
working on your boards later tonight - sorry for the delay.
@Acid.
Working on you 600 too.
@VincentGR , im not sure do the pins look bent in anyway? does the easynet work on the 1200?
working on your boards now - soaking in lemon juice at the mo - they caps have leaked a lot on the 600.
@ taj
working on your boards later tonight - sorry for the delay.
@Acid.
Working on you 600 too.
@VincentGR , im not sure do the pins look bent in anyway? does the easynet work on the 1200?
Yes, pins are OK and it works on A1200. This week I am waiting a pcmcia ram to test if easynet is incompatible with my mobo. I'll notify u and if i have a prob we will discuss if u can fix it. (if u have spare time) thanks in advance.
Tajmaster
Truth, Justice, all that stuff.
@crazyegg
working on your boards now - soaking in lemon juice at the mo - they caps have leaked a lot on the 600.
@ taj
working on your boards later tonight - sorry for the delay.
@Acid.
Working on you 600 too.
@VincentGR , im not sure do the pins look bent in anyway? does the easynet work on the 1200?
Woo hoo
thanks Mike, much appreciated
Winona2k
New member
Hi,
New member here. Just wondering if you still have audio caps for the A4000 mobo? I have a Mobo with sound problems and I've been told that a recap might fix it. Are you familar with this particular problem?
New member here. Just wondering if you still have audio caps for the A4000 mobo? I have a Mobo with sound problems and I've been told that a recap might fix it. Are you familar with this particular problem?
I have some work for you my friend!
I just checked one of my workhorse machines (1D.4) after a long time being laid up and there are signs of cap leakage, it works perfect but I want it saved before something bad happens!
Also have another 1D.4 which I cannot remember the history of, belonged to somebody who had paid Wizard Developments to upgade it, ram board, hard drive with install kit etc. But the custom drive bracket they provided kinda marked the holes a bit. Nowt wrong really just could do with a knowing eye and then some enamel on it. It also failed on me when reading disks so I just left it at that. It has been in my storage for a very long time! I was surprised to find 3.1 roms on it etc.
I do have more but one of these has issues, think it fails after a while. Cannot use the IDE port without it bombing out etc?
Regards J
I just checked one of my workhorse machines (1D.4) after a long time being laid up and there are signs of cap leakage, it works perfect but I want it saved before something bad happens!
Also have another 1D.4 which I cannot remember the history of, belonged to somebody who had paid Wizard Developments to upgade it, ram board, hard drive with install kit etc. But the custom drive bracket they provided kinda marked the holes a bit. Nowt wrong really just could do with a knowing eye and then some enamel on it. It also failed on me when reading disks so I just left it at that. It has been in my storage for a very long time! I was surprised to find 3.1 roms on it etc.
I do have more but one of these has issues, think it fails after a while. Cannot use the IDE port without it bombing out etc?
Regards J
Timing fixes done / motherboard test on both 1d4 and 2b and Apollo 1260 running.
mike
http://youtu.be/wbFNJpMcwwQ
http://youtu.be/CfltwQcSNjA
mike
http://youtu.be/wbFNJpMcwwQ
http://youtu.be/CfltwQcSNjA
- Status