Wanted A600 motherboard
- Thread starter Mikele
- Start date
- Replies 3
- Views 325
If you aren't after something cheap I have something a bit special you might be interested in. I've been working on a replica A600 2D motherboard for a few years now. The money raised will be put into a CD32 rev4 replica next.
I scanned and traced a rev 2D pcb using Kicad, fixed a couple of minor things that for some reason weren't connected on original boards but that's all as I wanted to keep it original. The major parts are taken from the scanned board, AVX MLCC, Panasonic resistors, Panasonic 0.1% resistors (thin film) in audio path for high accuracy/better balance and theoretically less noise. Panasonic hybrid SMD capacitors and solid polymer through holes. Rohm RGB encoder that is somewhere in between CXA1645 and CXA2075. Basically no expense spared.
I scanned and traced a rev 2D pcb using Kicad, fixed a couple of minor things that for some reason weren't connected on original boards but that's all as I wanted to keep it original. The major parts are taken from the scanned board, AVX MLCC, Panasonic resistors, Panasonic 0.1% resistors (thin film) in audio path for high accuracy/better balance and theoretically less noise. Panasonic hybrid SMD capacitors and solid polymer through holes. Rohm RGB encoder that is somewhere in between CXA1645 and CXA2075. Basically no expense spared.
Attachments
Last edited:
I've got one (a few!) feel free to DM. It would be <snip>pounds/GBP delivered to UK or EU. Feel free to DM if interested.
Last edited by a moderator:
