For Sale Amiga A4000 Reproduction Case Pre-Order Closed

[Ntsimouris]

Can you send a photo of packaging?

 

[Karlosjackel]

Received!

Wow! Thankyou! Absolute quality....

 

[Boing-ball]

Can you send a photo of packaging?

Does this answer your question?

 

[Ntsimouris]

Does this answer your question?

yes! hope you ll enjoy setting it up!!

 

[Boing-ball]

yes! hope you ll enjoy setting it up!!

Just make sure you dig around for the plates etc…

 

[Boing-ball]

Positive feedback given to seller. Cheers

 

[Xanxi]

Hi.
Received mine, very well packed, and as a bonus i didn't have customs to pay.
Looks awesome. Will put inside my old spare recapped mobo inside with an aluminum faceplate from PRS soon.
Thanks again.

 

[Ordyne]

For those receiving cases, as well as the extras you ordered you will receive a package with some essential items.

Screws for the mainboard (plus a few spares)
Blank plates for the rear expansion slots (only if you ordered vented ones)
4x 1.5mm adhesive backed spaces for the 5.25 drive bay, if required these are to be stuck to the inside of the bay.
5.5mm Spanner, this fits nuts used on the case.
Mouse/Joy Port Strain Relief Plate.




If you have any questions just drop me a PM!

 

[Boing-ball]

For those receiving cases, as well as the extras you ordered you will receive a package with some essential items.

Screws for the mainboard (plus a few spares)
Blank plates for the rear expansion slots (only if you ordered vented ones)
4x 1.5mm adhesive backed spaces for the 5.25 drive bay, if required these are to be stuck to the inside of the bay.
5.5mm Spanner, this fits nuts used on the case.
Mouse/Joy Port Strain Relief Plate.

View attachment 2483576


If you have any questions just drop me a PM!

Must add, these cases are awesome. The Zulu SCSI backplate also accommodates a SCSI2SD V6 perfectly. Any news if any more backplates will be designed and produced? Could do with a DB25 one to mount a External SCSI connector where the HDD would sit Just getting a quote for a full 3D printed front cover and power button rod in Crystal white to fit

 

[Ordyne]

Must add, these cases are awesome. The Zulu SCSI backplate also accommodates a SCSI2SD V6 perfectly. Any news if any more backplates will be designed and produced? Could do with a DB25 one to mount a External SCSI connector where the HDD would sit Just getting a quote for a full 3D printed front cover and power button rod in Crystal white to fit

Just a DB25 in the smaller sized slot ?

 

[Boing-ball]

Just a DB25 in the smaller sized slot ?

Yes. Would be handy to have. Or even a 9pin and 25pin option maybe good for this who want to mount Comm ports or VGA outputs without sacrificing a Zorro slot for them.

 

[Karlosjackel]

Must add, these cases are awesome. The Zulu SCSI backplate also accommodates a SCSI2SD V6 perfectly. Any news if any more backplates will be designed and produced? Could do with a DB25 one to mount a External SCSI connector where the HDD would sit Just getting a quote for a full 3D printed front cover and power button rod in Crystal white to fit

Now this I'd like to see! I had a look at some 3D options regards to the front panel... I'd like to see how yours turns out!

You going to light the rod some how? Like a pipe light?

 

[Boing-ball]

Now this I'd like to see! I had a look at some 3D options regards to the front panel... I'd like to see how yours turns out!

You going to light the rod some how? Like a pipe light?

Nothing as flash as that…. Will PM @Ordyne regards backplate ideas. Rather than turn this sales thread into a general chat

 

[QuarXky]

Greath news,

Contacted for payment, pending question request of include also a ZULU SCSI mount if possible.

thx

 

[alama]

Full payment done

 

[QuarXky]

ZULU SCSI mount added ,Thank you Ordyne!.
Full Payment sent

 

[cv643d]

Got the case, sadly not in black color as I wanted (perhaps someone else will end up with it? ), but perhaps I can paint it myself at home.

 

[videogeek]

Declaring interest. In full kit w/ extras

Need the case cover painted grey/silver as I have the aluminum front facia.

If the Zulu scsi is just a bracket then I would like that too if it is the actual device I am going to source it elsewhere.

Will pay when second round starts


Optional extras:

Honeycomb vented expansion slot covers £10
Honeycomb vented Zorro card slot covers £12
PCB Insulation sheet set (Sheet under main board and one that sits behind 3.5" drive's and Zorro daughter card) £10
CF to IDE PCB Expansion slot mount (does not come with PCB, PCB available on ebay etc) £10
SD to IDE PCB Expansion slot mount (does not come with PCB, PCB available on ebay etc) £10

---

(Interest marked as expired by Ordyne)

 

[Timtheloon]

Final payment sent

 

[Ordyne]

Got the case, sadly not in black color as I wanted (perhaps someone else will end up with it? ), but perhaps I can paint it myself at home.

Sorry Do you want to send the cover back and I will make another in black?