For Sale Amiga A4000 Reproduction Case Pre-Order Closed

[crrn]

Declaring interest.

---

Declaring interest. all optional extras.

---

(Interest withdrawn here)

 

[Vampire1200]

Thank you very much for the new home for my Amiga 4000. I'll let him move in there in the next few days.
Great work, keep it up

 

[Timtheloon]

Started my build today

@Ordyne will you be doing other back plates for this case i.e. one for a Ratte Auto monitor switch or USB ports I'm talking about the 5 extra slots this case has which the original case does not

 

[nickrb]

Declaring interest.

---

Main case + PCB Insulation sheet set (Sheet under main board and one that sits behind 3.5" drive's and Zorro daughter card) £10
Thank you

---

(Interest withdrawn here)

 

[Ordyne]

Started my build today

@Ordyne will you be doing other back plates for this case i.e. one for a Ratte Auto monitor switch or USB ports I'm talking about the 5 extra slots this case has which the original case does not

I made these for @Boing-ball, top two are just a variation on Ratte with a passthrough for the ribbon cable. Last one is just a 25 way DB connector

Let me know some dimensions from the USB mount you have and I can make it for you and add it to the list.

 

[Boing-ball]

Started my build today

@Ordyne will you be doing other back plates for this case i.e. one for a Ratte Auto monitor switch or USB ports I'm talking about the 5 extra slots this case has which the original case does not

@Ordyne made me some up after working through the specs with him on my build.

I’m using the RATTE with the top template and the DB25 for a SCSI connector off my Cyberstorm. Recommended

 

[Timtheloon]

I made these for @Boing-ball, top two are just a variation on Ratte with a passthrough for the ribbon cable. Last one is just a 25 way DB connector

View attachment 2486944

Let me know some dimensions from the USB mount you have and I can make it for you and add it to the list.

would love one for my ratte however this motherboard I'm using, all the custom chips have been socketed although thats great for replacing the Custom IC's not so great for Ratte's and Indy's

however @highpuff as indicated to me that the ratte can get its signals from the parallel port but i need to look into this

I'l try and find a USB i'd like to use

i was also going to ask about the prelude mini version that @AmigaDigital made however the cable is not long enough to reach where I was hoping to put it

 

[highpuff]

@Timtheloon You are right It can se signals from the Parallel port as well while using the external version of SwitchControl.

 

[Yulquen74]

Edit:
Declaring interest in 2 cases - the second one with black top cover,

Edit2:
An extra top cover if possible (original color).

Extras (both cases):
Honeycomb vented expansion slot covers £10
Honeycomb vented Zorro card slot covers £12
PCB Insulation sheet set (Sheet under main board and one that sits behind 3.5" drive's and Zorro daughter card) £10
CF to IDE PCB Expansion slot mount (does not come with PCB, PCB available on ebay etc) £10
SD to IDE PCB Expansion slot mount (does not come with PCB, PCB available on ebay etc) £10

Shipping to Norway.

---

(Marked as sold/completed by Ordyne)

 

[Yulquen74]

Updated my post above.

 

[Normski]

Declaring interest.

2 x Cases (one black cover)

---

(Marked as sold/completed by Ordyne)

 

[Ordyne]

Current update - Fighting with steel suppliers for decent material, I've had the last two weeks of being sent absolute garbage which I've had to refuse as its too damaged to make the cases. Sorry for the delay

 

[nickrb]

Interest withdrawn. (was previously declared here)

---

Apologies, but I will need to withdraw interest.

 

[Timtheloon]

I made these for @Boing-ball, top two are just a variation on Ratte with a passthrough for the ribbon cable. Last one is just a 25 way DB connector

View attachment 2486944

Let me know some dimensions from the USB mount you have and I can make it for you and add it to the list.

Hi again sorry for the delay

Can you do this USB has a backplate please for the case I bought i can send it to you if this helps getting better dimensions or PM me with all the dimensions you would need

1x 2 port usb backplate
1x Ratte Auto Switch backplate
1x CF backplate

are you able to do these with the honey comb effect?

 

[Cefa68000]

Declaring interest.

---

I am interested 1 unit with honeycomb expansion slots 1 cf ide slot and 1 insulation sheet if available.

---

(Marked as sold/completed by Ordyne)

 

[Ordyne]

Hi again sorry for the delay

Can you do this USB has a backplate please for the case I bought i can send it to you if this helps getting better dimensions or PM me with all the dimensions you would need
View attachment 2488200View attachment 2488201


1x 2 port usb backplate
1x Ratte Auto Switch backplate
1x CF backplate

are you able to do these with the honey comb effect?

Answered in PM

 

[wildcopper]

Declaring interest.

---

One top cover, original color. Will PM about coordinating delivery.

Edit: also need 5.25/floppy drive tray

---

(Marked as sold/completed by Ordyne)

 

[mvickers03]

Hi, I am interested in a black case with all options extras.

 

[mvickers03]

Declaring interest.

---

(Marked as sold/completed by Ordyne)

 

[Shatush99]

Declaring interest.

---

Declaring interest for just mouse/joy port plate cover for mainboard please ?

---

(Marked as sold/completed by Ordyne)