For Sale Cyberstorm MK3 - 68060 Rev. 6 - 64MB Ram - Perfect condition

[Kunglao]

Hi Folks,

I'm selling my Cyberstorm Mk3 for the Amiga 4000 including a Rev.6 68060.
This Card runs very cool with the installed 50Mhz.
RAM, SCSI, all tested and working without error.

Asking 1.500 EUR + shipping&payment fees

 

[jkdsteve]

Can I ask for a better picture? It looks like someone has worked on the KEL connector?

 

[Hannibal]

Are the other two ram sockets working?

 

[MadMungo]

Can I ask for a better picture? It looks like someone has worked on the KEL connector?

Nah, all my Phase5 accelerators look the same on the KEL connector. It is just the flux used during assembly.

 

[Joe]

Nah, all my Phase5 accelerators look the same on the KEL connector. It is just the flux used during assembly.

Nice, how many Phace5 accelerators do you have?

 

[Normski]

I’m interested, with shipping to Sydney, Australia. Looking to put into an Amiga 4000, or AA3000+ (Hese motherboard)

cheers,

Norman.

 

[MadMungo]

nice, how many phace5 accelerators do you have?

4. 2 csppc & 2 bppc

 

[AlessandroBilbao]

Nah, all my Phase5 accelerators look the same on the KEL connector. It is just the flux used during assembly.

i confirm, same mines

 

[Cerv]

Declaring interests, next in line...

 

[fery1200]

Interested next in line.

 

[Kunglao]

Hi, sorry for late replay, was a pretty busy week at work :roll:. Normski seems to be first in line. Will look up shipping to Sydney and send you a PM with details.

 

[Normski]

PM sent, ready to transfer $$.

cheers,

Normski

 

[CodePoet]

Still available?

 

[CodePoet]

Declaring interest.

---

declaring interest pending availability and shipping costs to US
also, curious if this will work in an A3000T and/or A3000D

---

(Interest withdrawn here)

 

[Whaka]

also, curious if this will work in an A3000T and/or A3000D

can't really tell for the "T" but i have mine overclocked to 75 MHz for 15 years now in my 3000D.
there's no particular issue, except the INT2 modification if you plan to use the Mk3 scsi.
i also think a good thing to do is to add some heatsink on the mach/cypress CPLD. these run hot (i really mean it...)
and a 40mm fan (there's some 3D models frames to ease this task) on the side of the daughterboard.

 

[klx300r]

good luck on your sale I absolutely adore mine !

 

[CodePoet]

Interest withdrawn. (was previously declared here)

 

[Mokry]

Is the card sold or still available?

 

[Kunglao]

Still available

 

[Rms68]

Can this be overcooked with cooling?