AmigaSociety
New member
**Also open to some partial trades. I am looking for an Atari Falcon. ** 
Toying around with selling one of my Cubes again. May change my mind in a mater of days if I get no takers like before.
But, today it is for sale. Most positive part of my Cube compared to the ones you see on eBay, is cosmetically, it is almost what I consider a 10 on a 10 point scale. This Cube I have is so clean with barely any scrapes and scratches you see on most Cubes. This one has seen two owners. The original owner from early 1990s and then I. I am anal on cosmetics so this Cube is one clean unit. It is not perfect so I will not call it Mint but in my humble opinion, very close and tons nicer than most you see.
It is a 68040 @ 25MHz model and will include a keyboard and mouse with all proper cables. I tried selling on eBay without a NeXTdimension but it did not sell so I will not install a NeXTdimension board in this Cube and try selling it that way. The NeXTdimension board will have 32MB ram on it. Will even include a decent 17" Megapixel Mono Display with it if you want it. The display is not on the same level as the Cube itself cosmetically but it is a 6 to 7 out of 10. It works, display is still fairly bright, and that is about it on that. It gets the job done if you have no display already. I do own and could sell a hard to find NeXT Megagpixel 21" Display but these are real heavy so be prepared to pay lots for shipping if you want a 21" display. I may be convinced to sell the NeXT 21" Display for $300 to $400 range + shipping but we would need to talk first. This Cube has 312MB Hard Drive and 64MB RAM. NeXTSTEP 3.3 is installed but comes with no re-install CD as I only have one of those at that stays with my Cube I am keeping.
You will want to find a SCSI floppy drive or buy a floppy drive kit from BlackHole so you can feed this Cube floppies down the road. It came with a NeXT MO drive that is of course bad and was chucked long ago. So, one slot has the 312MB drive and the other is free. I did put on the bezel a stock plate so the MO hole is covered so no dust gets in there.
If you have any questions, hit me up. I have been known to change my mind if things take too long to sell <grin>. Don't need to sell but today figured I would post it for sale.
So, if your goal is to have a super clean MeXTcube with hard to find NeXTdimension Board, look no further, as this one is a beauty!
$1699obo + shipping
TJ
Video showing this Cube running can be found here. Connected to my mono display in this video.
http://www.youtube.com/watch?v=uQsElQ8n3Gc
Pictures here.
Toying around with selling one of my Cubes again. May change my mind in a mater of days if I get no takers like before.
But, today it is for sale. Most positive part of my Cube compared to the ones you see on eBay, is cosmetically, it is almost what I consider a 10 on a 10 point scale. This Cube I have is so clean with barely any scrapes and scratches you see on most Cubes. This one has seen two owners. The original owner from early 1990s and then I. I am anal on cosmetics so this Cube is one clean unit. It is not perfect so I will not call it Mint but in my humble opinion, very close and tons nicer than most you see.It is a 68040 @ 25MHz model and will include a keyboard and mouse with all proper cables. I tried selling on eBay without a NeXTdimension but it did not sell so I will not install a NeXTdimension board in this Cube and try selling it that way. The NeXTdimension board will have 32MB ram on it. Will even include a decent 17" Megapixel Mono Display with it if you want it. The display is not on the same level as the Cube itself cosmetically but it is a 6 to 7 out of 10. It works, display is still fairly bright, and that is about it on that. It gets the job done if you have no display already. I do own and could sell a hard to find NeXT Megagpixel 21" Display but these are real heavy so be prepared to pay lots for shipping if you want a 21" display. I may be convinced to sell the NeXT 21" Display for $300 to $400 range + shipping but we would need to talk first. This Cube has 312MB Hard Drive and 64MB RAM. NeXTSTEP 3.3 is installed but comes with no re-install CD as I only have one of those at that stays with my Cube I am keeping.
You will want to find a SCSI floppy drive or buy a floppy drive kit from BlackHole so you can feed this Cube floppies down the road. It came with a NeXT MO drive that is of course bad and was chucked long ago. So, one slot has the 312MB drive and the other is free. I did put on the bezel a stock plate so the MO hole is covered so no dust gets in there.
If you have any questions, hit me up. I have been known to change my mind if things take too long to sell <grin>. Don't need to sell but today figured I would post it for sale.
So, if your goal is to have a super clean MeXTcube with hard to find NeXTdimension Board, look no further, as this one is a beauty!
$1699obo + shipping
TJ
Video showing this Cube running can be found here. Connected to my mono display in this video.
http://www.youtube.com/watch?v=uQsElQ8n3Gc
Pictures here.
