Dear Amigians,
I have decided that I will sell my CyberstormPPC card and CybervisionPPC card as I dont use my A4000 as much as I thought I would do with these cards installed. I bought the CyberstormPPC card here at Amibay 2019. I think it was modified by user stachu100 for the seller. The CybervisionPPC card I bought from someone here in Sweden.
The cards has been running stable except for the SCSI-part. When I was using a SCSI-disk connected to the card I could have a partition of my harddrive corrupted. I don’t know if SCSI chip is damaged or not. But because of that I have been using a Elbox FastATA card instead. During my time with the CyberstormPPC card I have been using it together with both Mediator, ZZ9000 and CybervisionPPC at the end. I have been using both Workbench 3.2 (with WarpUp and Warp3D) and AmigaOS 4.1FE. Before I removed the card from my A4000 I was running a 4 hour test with Gears without problem. I had some extra fans installed in my A4000 that was blowing air from the front over the card and out of the rear of chassi. I have also been using an Corsair SF450 PSU.
I don’t know why but under Workbench 3.2 the PowerPC CPU speed is showing as 60Mhz. But under OS 4.1 it is showing correct speed. See included pictures.
CyberstormPPC (Phase5 version)
PowerPC: 420MHz
68060 60Mhz (rev 6)
128MB ram
CybervisionPPC rev 1.0 (Phase5 version)
Price for the set: 2200EUR + shipping cost.
Shipping: Will ship worldwide except to countries that are under sanctions.
Payment: Paypal friends & family or IBAN bank transfer.
At my Google drive are some movies showing these cards running WipeOut 2097, Quake and other software.
https://drive.google.com/drive/folders/1lxBTPIu1fT9qsWZ8QVDeRh2ZaxwiGtGd?usp=drive_link
I have decided that I will sell my CyberstormPPC card and CybervisionPPC card as I dont use my A4000 as much as I thought I would do with these cards installed. I bought the CyberstormPPC card here at Amibay 2019. I think it was modified by user stachu100 for the seller. The CybervisionPPC card I bought from someone here in Sweden.
The cards has been running stable except for the SCSI-part. When I was using a SCSI-disk connected to the card I could have a partition of my harddrive corrupted. I don’t know if SCSI chip is damaged or not. But because of that I have been using a Elbox FastATA card instead. During my time with the CyberstormPPC card I have been using it together with both Mediator, ZZ9000 and CybervisionPPC at the end. I have been using both Workbench 3.2 (with WarpUp and Warp3D) and AmigaOS 4.1FE. Before I removed the card from my A4000 I was running a 4 hour test with Gears without problem. I had some extra fans installed in my A4000 that was blowing air from the front over the card and out of the rear of chassi. I have also been using an Corsair SF450 PSU.
I don’t know why but under Workbench 3.2 the PowerPC CPU speed is showing as 60Mhz. But under OS 4.1 it is showing correct speed. See included pictures.
CyberstormPPC (Phase5 version)
PowerPC: 420MHz
68060 60Mhz (rev 6)
128MB ram
CybervisionPPC rev 1.0 (Phase5 version)
Price for the set: 2200EUR + shipping cost.
Shipping: Will ship worldwide except to countries that are under sanctions.
Payment: Paypal friends & family or IBAN bank transfer.
At my Google drive are some movies showing these cards running WipeOut 2097, Quake and other software.
https://drive.google.com/drive/folders/1lxBTPIu1fT9qsWZ8QVDeRh2ZaxwiGtGd?usp=drive_link
