Hi all, picked up this machine a few days ago as faulty. There was no power so I opened it up and found it was covered in coffee. I stripped everything and scrubbed it all clean, motherboard included, and it came up really nice. However while in there I found the fuse was blown. I replaced it with a glass fuse and this restored power and the snes booted fine.
I then used a Nintendo hardware test rom to check it was working fine and it passed all tests.
I have now installed a SuperCIC chip which makes the console region free.
Holding down the reset button on the console allows you to select Pal 50hz (green led), Ntsc 60hz (red led) or auto (orange led) and which will detect the region of the inserted cartridge and set the console accordingly.
The console is in clean original colour with only minor yellowing the the front.
Will come with a controller (3rd party), AV cable (RGB recommended) and a self made power supply which works fine. No games/cartridges are included.
*Please note*
While the console is hardware capable of playing US cartridges I have not widened the slot so they will not physically fit as is.
I am asking £40 (was £50 then £45) plus p&p for this setup










I then used a Nintendo hardware test rom to check it was working fine and it passed all tests.
I have now installed a SuperCIC chip which makes the console region free.
Holding down the reset button on the console allows you to select Pal 50hz (green led), Ntsc 60hz (red led) or auto (orange led) and which will detect the region of the inserted cartridge and set the console accordingly.
The console is in clean original colour with only minor yellowing the the front.
Will come with a controller (3rd party), AV cable (RGB recommended) and a self made power supply which works fine. No games/cartridges are included.
*Please note*
While the console is hardware capable of playing US cartridges I have not widened the slot so they will not physically fit as is.
I am asking £40 (was £50 then £45) plus p&p for this setup










Last edited:




