Closed Zida Tomato Board 4DPS Rev 2.11 + 486 DX4 100 WB + 4 MB FPM + CL-GD5446 VGA Bundle

  • Thread starter Thread starter xeon3d
  • Start date Start date
  • Replies Replies 7
  • Views Views 992
Status
Not open for further replies.

xeon3d

Member
AmiBayer
Rating - 100%
52   0   0
Joined
Nov 5, 2015
Posts
520
Country
Portugal
Region
Algarve
Similarly to my LS-486E Bundles, I also have one of these to, after some careful consideration, let go.

Copying most stuff from the other thread as it's a very similar board:

Zida Tomato Board 4DPS Rev. 2.11 + Intel 486 DX4 100Mhz WriteBack Enhanced Version (with Cooler) + 4MB of FPM RAM + Cirrus Logic CL-GD5446 PCI VGA Card
  • SiS 85C496 Chipset
  • Supports Intel/AMD/Cyrix/SGS-Thompson/IBM 486/SX/DX/DX2/DX4 CPUs
  • Supports AMD Am5x86-p75 133MHz and Cyrix 5x86-133.
  • Socketed CR2032 CMOS Battery (No Leaking!) and a NEW CR2032 will be installed.
  • 3.3V/3.45V/4V/5V CPUs Supported
  • Supports FSB 25 to 50MHz!!!
  • 128KB/256KB Cache Supported (Currently has 256KB Installed)
  • On-Board IDE, FDD and Serial Controller
  • 2x 72 pin SIMM
  • 3 PCI Slots
  • 3 ISA Slots
Price: 80€ 70€ + Shipping
Payment:
Paypal Friends.
Shipping: Belgium, France, Spain, Netherlands and Portugal = 13€ via Mondial Relay. Other countries please let me know where you're from so I can calculate shipping, but should be around 20€ for most EU countries. Do note I ship worldwide (minus countries where there is conflict or are sanctioned, sorry).
Also available for sale elsewhere.

20240518_182830.jpg20240518_191833.jpg
 

Attachments

  • 20240518_182819.jpg
    20240518_182819.jpg
    762.4 KB · Views: 26
  • 20240518_185346.jpg
    20240518_185346.jpg
    697.1 KB · Views: 23
  • 20240518_192044.jpg
    20240518_192044.jpg
    257.5 KB · Views: 23
Last edited:
PM replied.
Unfortunately I don't have this board anymore. Spoken with ooge about it with an alternative with a x5-133 CPU.
Closing thread.
 
Status
Not open for further replies.

Interest Queue

Back
Top Bottom