No cards available,
please DO NOT declare interest!
Hey! Hope you're all doing fine,
coming up with the project I've built recently-
Zorro LAN IDE cards with custom made brackets:
What is it!?
It's a small but powerful Network card for Amiga Computers designed by Matze & buggs
gitlab.com
This card has autosense function and can work in both- Zorroll & Zorrolll Amiga systems,
It also has an IDE Interface & Clockport on it
Network:
The FastEthernet part is based on a ENC624J600 LAN chip and runs with SANAII driver.
Zorro2 variant can transfer up to 3.5mb/s at most, while Zorro3 variant has a significantly faster LAN<->Amiga interface of 6-7mb/sec. Please note that these RAW data transfer numbers are not the only factor in LAN performance on Amiga and that the actual observed speeds with TCP transfers are in the range of 1-2 MB/s (depending on IP stack and CPU used!)
IDE:
IDE part is based on Oktagon AT design, has its own fully autoconfig Bootrom,
works on Kickstarts from 1.3 to 3.2.2.1
Comes with a switchable DualROM: Oktapussy / LIDE BootROM
LIDE supports drives up to 2TB, also atapi CD-ROMs are supported
more information about new LIDE ROM may be found here:
github.com
May be used to connect IDE CD-ROM or additional storage media for example..
Clockport:
it's so called fast Clockport
is compatible to A600/A1200 ones but resides at a different address range:
$b90000
this offer has custom made Breakouts with metal slots shown above these fits perfectly in any Big box amiga,
asked price:: 110€
shipping is not included and may be paid separately!
Disclaimer:
Please be aware - this is 100% hobbyist project! No returns are accepted!
use it under your own responsibility.
Only You is responsible for checking the correct position and functionality of your board and the compatiblity of the system You use.
By using this project You agree that I cannot be held responsible if it will destroy any of your devices, damage your computer, burn down your house or whatever.
latest driver is attached - please use 2.11 for reliable function of the card!
PPS
from now on it is possible to expand IDE interface on that card up to four devices with a special 4CH adapter designed by user @hamag:
View attachment 2490930
View attachment 2490931
View attachment 2490932
View attachment 2490933
IDE Port should be straight for better fitting.
So if You plan to use that adapter - please let me know while ordering LAN-IDE card..
Asking 25€ for that adapter
Regards,
8 Bit Dreams
please DO NOT declare interest!
Hey! Hope you're all doing fine,
coming up with the project I've built recently-
Zorro LAN IDE cards with custom made brackets:
What is it!?
It's a small but powerful Network card for Amiga Computers designed by Matze & buggs
Matthias Heinrichs / Zorro-LAN-IDE · GitLab
A LAN/IDE solluntion with Clockport for the Amiga ZorroII/III Slot
gitlab.com
It also has an IDE Interface & Clockport on it
Network:
The FastEthernet part is based on a ENC624J600 LAN chip and runs with SANAII driver.
Zorro2 variant can transfer up to 3.5mb/s at most, while Zorro3 variant has a significantly faster LAN<->Amiga interface of 6-7mb/sec. Please note that these RAW data transfer numbers are not the only factor in LAN performance on Amiga and that the actual observed speeds with TCP transfers are in the range of 1-2 MB/s (depending on IP stack and CPU used!)
IDE:
IDE part is based on Oktagon AT design, has its own fully autoconfig Bootrom,
works on Kickstarts from 1.3 to 3.2.2.1
Comes with a switchable DualROM: Oktapussy / LIDE BootROM
LIDE supports drives up to 2TB, also atapi CD-ROMs are supported
more information about new LIDE ROM may be found here:
GitHub - LIV2/lide.device: An Open source IDE driver for Amiga computers
An Open source IDE driver for Amiga computers. Contribute to LIV2/lide.device development by creating an account on GitHub.
github.com
Clockport:
it's so called fast Clockport
is compatible to A600/A1200 ones but resides at a different address range:
$b90000
this offer has custom made Breakouts with metal slots shown above these fits perfectly in any Big box amiga,
asked price:: 110€
shipping is not included and may be paid separately!
Disclaimer:
Please be aware - this is 100% hobbyist project! No returns are accepted!
use it under your own responsibility.
Only You is responsible for checking the correct position and functionality of your board and the compatiblity of the system You use.
By using this project You agree that I cannot be held responsible if it will destroy any of your devices, damage your computer, burn down your house or whatever.
latest driver is attached - please use 2.11 for reliable function of the card!
PPS
from now on it is possible to expand IDE interface on that card up to four devices with a special 4CH adapter designed by user @hamag:
View attachment 2490930
View attachment 2490931
View attachment 2490932
View attachment 2490933
IDE Port should be straight for better fitting.
So if You plan to use that adapter - please let me know while ordering LAN-IDE card..
Asking 25€ for that adapter
Regards,
8 Bit Dreams
Last edited:
