Sold Zorro IDE-CP-LAN card with custom brackets

[AwakeningStar]

Declaring interest.

---

All users who declared interest - was served.
Enjoy Your new hardware and do not hesitate to contact me if something isn't clear.

PS
Have some PCBs left, fell free to declare interest if card needed...

PPS
from now on it is possible to expand IDE interface on that card with up to four devices with a special 4CH adapter designed by user @hamag:
View attachment 2490930View attachment 2490931View attachment 2490932View attachment 2490933
IDE Port should be straight for better fitting.
So if You plan to use that adapter - please let me know while ordering LAN-IDE card..
Asking 20€ for that adapter
Regards,

8 Bit Dreams​

Im interested only on the adapter

---

(Marked as sold/completed by 8 Bit Dreams)

 

[AwakeningStar]

I have purchased one clock port PicoWyFy

where can I find documentation showing the Zorro IDE-CP-LAN card clock port pinout?

The PicoWyfY clock port is in the picture below
The two most extreme pins facing the board outside are ground (chorted)
The inner most extreme pins facing the inside of the board we have +5v

With the help of one multimeter I detected which pins where shorted and attached PicoWyfy accordingly (image below)

Question is. Is the way the PicoWyfy is connected correct?

Appreciate all support before I power my A4000.

 

[AwakeningStar]

Thank you for your support #8 bit Dreams

I now have my A4000 with Wifi network working fast (or clockport fast )
At least it is better than the WODEM at 115000 serial port

I used RoadShow and used the Showconfig tool to see the Clockport address (in my case EA00000)
the picowyfy uses one Raspberry PI nano which needs to be configured with a tool, but as soon as you configure the correct clockport address the SSI connect command runs ok (even with DHCP auto-config IP address)
to make it automatic can be configured in the startup file

Fantastic !!!

 

[Reborn]

Declaring interest.

---

Declaring interest in one.

---

(Marked as sold/completed by 8 Bit Dreams)

 

[jallukas]

Arrived safely, tested LAN feature for now and working. Highly recommended this product. Thanks.

 

[Bharaputra]

Declaring interest.

in one card w/ standard bracket/slot cover if still available

---

(Marked as sold/completed by 8 Bit Dreams)

 

[jmggilbert]

Declaring interest.

---

(Marked as sold/completed by 8 Bit Dreams)

 

[mortenkjerulff]

Declaring interest.

---

If still available ?

---

(Interest withdrawn here)

 

[8 Bit Dreams]

Yes, new batch of the pcbs arrived,
please expect payment notifications soon!

 

[kb2012]

Declaring interest.

---

(Marked as sold/completed by 8 Bit Dreams)

 

[amigo-mexicano]

Declaring interest.

---

(Interest marked as expired by 8 Bit Dreams)

 

[a1200freak]

Declaring interest.

---

in one card

---

(Interest withdrawn here)

 

[Wrangler]

Declaring interest.

---

Declaring interest in one card plus posting to the UK please

---

(Interest withdrawn here)

 

[mortenkjerulff]

Interest withdrawn. (was previously declared here)

---

Sorry, I have decided to go for another solution.

 

[Nobse67]

Declaring interest.

---

I declare interest for a Zorro IDE-CP-Lan Card

---

(Marked as sold/completed by 8 Bit Dreams)

 

[8 Bit Dreams]

@all persons in queue:
I've started to build next batch - please expect payment notifications during this week. Will be able to cover all orders in line
Regards,

8 Bit Dreams

 

[Telsar]

Declaring interest.

---

interested in one

---

(Marked as sold/completed by 8 Bit Dreams)

 

[thebajaguy]

Payment Sent
Edit: Package received at address/secured, but I'm away until ~12/8

 

[PortVortex]

Hi.
You can mark me as completed as i recieved my card together with the DickeOlga a few months ago.

 

[ocean]

Declaring interest.

As I cannot get my AT-Bus 2008 clone to work in my CDROM & PiStorm -setup, this would be my saviour... :-D

---

(Interest withdrawn here)