A500/A2000 Automatic Kickstart Switcher - New project!

  • Thread starter Thread starter Tuxbar81
  • Start date Start date
  • Replies Replies 736
  • Views Views 111773
Status
Not open for further replies.
Could you put me down for 6 also could you make any so it could take 3 roms also maybe one for the amiga 1200 so you could put a 1.3 rom in that
 
Could you put me down for 6 also could you make any so it could take 3 roms also maybe one for the amiga 1200 so you could put a 1.3 rom in that

6, it's possible! :) but not too many?! :lol:
A kickstart switcher with three Rom? The problem here is the logic to change the Kickstart.May need some changes.
Kickstart switcher for A1200? I don't know. I have never thought about that. The Kickstart is in a dual Roms. Actually, I need to look if it's possible.

- - - Updated - - -

Hi
Interested in one, postage to Sydney Australia

Cheers,
Marcin


Sent from my iPhone using Tapatalk

Added to the list!:)
 
Last edited:
Unfortunatly no. the actual design doesn't allow to plug it into an CDTV.
Im interested in one. Could you confirm it will fit a CDTV. CDTV have things in the way and need either an original specially made switch or an all in one programmed unit

http://www.bigbookofamigahardware.com/bboah/media/display_photos/kickromwswitch_jopower_3.jpg

Unfortunatly no. The actual design doesn't allow to plug it into an CDTV.
If there is enough interest for a CDTV switcher, I'll make a new design of the PCB.
 
This can be fitted into a amiga 600?

The Switcher can works onto the A600, the problem is the space under the Keyboard.
I think the adapter needs to be deported witha ribbon.
I'm going to see onto my A600... I didn't think about this computer.
 
I am interested in 2, pending the price of unit and shipping... Will PM you in a bit...
 
@tuxbar81:

Appreciate your feedback on this...

Price for Kickstart switcher will be 13.50€. (less than 15€ as I expected in the first post of this thread).
For the shipping rates, I don't know at this time. I have to see the weight of the parcel.
 
@tuxbar81:

Appreciate your feedback on this...

Price for Kickstart switcher will be 13.50€. (less than 15€ as I expected in the first post of this thread).
For the shipping rates, I don't know at this time. I have to see the weight of the parcel.
Can you please put me in line for two units (fully assembled). Thanks...

Need to ask, I am installing Kipper2k's CF+IDE+8MB RAM board, will your kit get in the way?
 
Last edited:
Its nice to see things are going fine with the project, when you are ready to ship these are you going to PM people or mention it in this thread. I don't always log on so please bear that in mind in case there isn't a fast reply from me ;)

All the very best,
Allen :)
 
Status
Not open for further replies.
Back
Top Bottom