For Sale A500 IDE adapters, PS/2 mouse adapter, A600 CF adapter
- Thread starter mkl
- Start date
- Replies 914
- Views 238215
Interested in V401 at least: jadero, chiark ,ube (cfide, v401?), AmigaDave (if fits in CDTV), Jomor58, TheGoose ,Seaside ,Bastich ,mjurney, also lurch, LTAC, (list of interested people compiled from thread and personal mail) . Please reply if still interested / not interested. There's about 14 units being completed.
Payment details: paypal mika.leinonen@tut.fi price 40 euros + 7 euros registered mail shipping up to 250 grams. I will include a free 40-pin IDE cable.
---------- Post added at 18:30 ---------- Previous post was at 18:16 ----------
Maybe also a few v296 boards, price 65 euros.
Payment details: paypal mika.leinonen@tut.fi price 40 euros + 7 euros registered mail shipping up to 250 grams. I will include a free 40-pin IDE cable.
---------- Post added at 18:30 ---------- Previous post was at 18:16 ----------
Maybe also a few v296 boards, price 65 euros.
Bastich
Active member
I'm still very interested 
tomthul mentioned this in conjunction with his 4mb ram upgrade here: https://www.amibay.com/showthread.php?t=12037&page=11
Any idea how is this going to work?
I really want an A500 with internal IDE->CF and 4mb of extra RAM.
tomthul mentioned this in conjunction with his 4mb ram upgrade here: https://www.amibay.com/showthread.php?t=12037&page=11
Any idea how is this going to work?
I really want an A500 with internal IDE->CF and 4mb of extra RAM.
I will take picture of v401 with straight ide-connector (i've got five such completed at the moment)
At Seaside and Bastich: please send payment this week then i can ship on monday (this friday post office might be closed)
At Seaside and Bastich: please send payment this week then i can ship on monday (this friday post office might be closed)
I have an Amiga 500 that I want to add a flash drive to it. Either CF or a IDE flash module, whichever is easier. I want to be able to close the case. What do you suggest?
Also what about the A1000. Which ones will work for adding one as well? Ready to order one.
Also what about the A1000. Which ones will work for adding one as well? Ready to order one.
I'm still very interested
tomthul mentioned this in conjunction with his 4mb ram upgrade here: https://www.amibay.com/showthread.php?t=12037&page=11
Any idea how is this going to work?
I really want an A500 with internal IDE->CF and 4mb of extra RAM.
Hi, I got a 2 MB ram / 44pin ide board for side slot from tomthul, will try it "asap" (on monday?)
Photo of v401 with straight ide connector
Attachments
Last edited:
Leaving +++++ feedback for Retrodave, Damiraga, thgill and twbrown for older transactions, and for Bastich and Jomor58 for the v401 board payments now.
I hope I've sorted out most 'pending' feedback. Please let me know if you are missing feedback.
I hope I've sorted out most 'pending' feedback. Please let me know if you are missing feedback.
Hi. V401 has one 40-pin ide connector, it can be used with IDE to CF adapter.
I don't have an Amiga 1000, but I looked at these photos,
http://www.amiga-hardware.com/download_photos/a1000mbrev6.jpg http://www.amiga-hardware.com/download_photos/a1000mbreva.jpg
and I'm in little doubt
if that metal shield piece could come in contact with the board. It's difficult to tell from photos.Taking data from the PCB cad program I used,
the v401 board extends 0.325 inches (9 mm) to this direction measuring from the pins of the CPU (or centers of the PCB pads/drills for these pins) and the plastic edge of 40-pin connector a few mm more. The right angle pin-header a little bit more, but these pins could be bent "upward" to clear that metal shield.
Last edited:
Tom Thul's RAM and IDE board seems to work with V401 board.
The board I received from Tom is a version that plugs to the side slot, with 2 MB SRAM chip and 44-pin 2.0mm female ide-connector and ide-cf adapter. The IDE-part seems to be at base-address F20000, so it doesn't conflict with ide68k, which emulates A600's ide at base address DA0000. RAM is configured by the program "AutoAddRAM" that reads configuration from file MemoryList.AAR, memory is added from 400000 to 5FFFF8.
The board I received from Tom is a version that plugs to the side slot, with 2 MB SRAM chip and 44-pin 2.0mm female ide-connector and ide-cf adapter. The IDE-part seems to be at base-address F20000, so it doesn't conflict with ide68k, which emulates A600's ide at base address DA0000. RAM is configured by the program "AutoAddRAM" that reads configuration from file MemoryList.AAR, memory is added from 400000 to 5FFFF8.
rkauer
Amiga fanboy
The best of two worlds: a fully autoconfig IDE (Mika's IDE68k) and awesome Tom's 2/4Mb RAM plus a secondary IDE for removable devices!
No more need for IDEFix97 (you can use it, BTW, but it is not necessary at all!) and a pair of external CF on the same machine with a real HD (or a single CF) hooked to Mika's IDE68k for autoboot!
Power A1000/500/2000!!!!!!!!!!!! Go go go!
No more need for IDEFix97 (you can use it, BTW, but it is not necessary at all!) and a pair of external CF on the same machine with a real HD (or a single CF) hooked to Mika's IDE68k for autoboot!
Power A1000/500/2000!!!!!!!!!!!! Go go go!
Jomor58, did you receive my PM reply? After I press "submit" button in PM form, the message doesn't appear in sent mail folder.
Your Amiga screen remains black with the adapter. You can check these things: bent cpu pins, adapter or cpu wrong way round in socket, all visibly ok, /int2 and /ovr wired to right places?
I can send a replacement board in priority letter post. I want the old one back but there's no hurry.
Your Amiga screen remains black with the adapter. You can check these things: bent cpu pins, adapter or cpu wrong way round in socket, all visibly ok, /int2 and /ovr wired to right places?
I can send a replacement board in priority letter post. I want the old one back but there's no hurry.
