For Sale A500 IDE adapters, PS/2 mouse adapter, A600 CF adapter
- Thread starter mkl
- Start date
- Replies 914
- Views 238213
Board received, thanks!
Haven't tested it yet....but have a couple of questions....where is pin 1 on the ide connector of the board (it is not marked...)?
Does it work on an A1000 without any extra connections (I remember that some expansion boards for the A1000 were asking for extra signals from the motherboard)?
Anyone with A1000 and ide68k experience?
Thanks in advance!
Haven't tested it yet....but have a couple of questions....where is pin 1 on the ide connector of the board (it is not marked...)?
Does it work on an A1000 without any extra connections (I remember that some expansion boards for the A1000 were asking for extra signals from the motherboard)?
Anyone with A1000 and ide68k experience?
Thanks in advance!
Image may help:
The pin header without walls isn't polarised, and the board has no "silk screen", so pin 1 isn't obvious.
There is a resettable fuse for ide pin 20 +5v supply in the newest assembled boards, but avoid wrong insertion anyway.
The pin header without walls isn't polarised, and the board has no "silk screen", so pin 1 isn't obvious.
There is a resettable fuse for ide pin 20 +5v supply in the newest assembled boards, but avoid wrong insertion anyway.
I think it fits in CDTV.
No cables included for /int2 and /ovr connections to mainboard, need to solder two wires yourself.
Price with shipping 45+10 = 55 euros.
Included is a free 40-wire IDE-cable.
No cables included for /int2 and /ovr connections to mainboard, need to solder two wires yourself.
Price with shipping 45+10 = 55 euros.
Included is a free 40-wire IDE-cable.
Last edited:
I am interested in this IDE adapter for Amiga 500. I would use it with CF card. Which version is recommended to buy? Which kickstart does it require (for autoboot). Is memory expansion included, or I have to plug in trapdor memory expansion? Are they any hardware modifications needed?
Sorry for so many questions, I hope you will find time to reccomend me the right thing.
Edit: PS2 adapter and memory expansion is also considered, so please post some prices and images for all.
Regards,
Last edited:
No memory included.
Homepage at http://iki.fi/mkl/ide/ide68k.html (i am going to tidy up the page some day)
Some pics at the hardware page. V297 is similar to other v29x boards.
Amiga 600 compatible KS-ROMs
Since the board emulates the internal IDE-interface of Amiga 600 and it doesn't have ROM of its own, you thus need Kickstart ROM with the driver for A600's IDE. These ROMs are:
KS3.1 V40.063
KS2.05 V37.350
KS2.05 V37.300 (Some say this isn't ok for some ide drives, i don't know any better.)
AFAIK, an early A600 KS-ROM KS2.05 V37.299 doesn't have the driver.
The PS/2Mouse adapters are wired for atari ST use.
Homepage at http://iki.fi/mkl/ide/ide68k.html (i am going to tidy up the page some day)
Some pics at the hardware page. V297 is similar to other v29x boards.
Amiga 600 compatible KS-ROMs
Since the board emulates the internal IDE-interface of Amiga 600 and it doesn't have ROM of its own, you thus need Kickstart ROM with the driver for A600's IDE. These ROMs are:
KS3.1 V40.063
KS2.05 V37.350
KS2.05 V37.300 (Some say this isn't ok for some ide drives, i don't know any better.)
AFAIK, an early A600 KS-ROM KS2.05 V37.299 doesn't have the driver.
The PS/2Mouse adapters are wired for atari ST use.
Attachments
Last edited:
Hello. I'm interested in purchasing one of your A500 IDE adapters with intention of connecting a 2.5" hard drive and booting from it. I currently have a Kickstart 3.1 rom ready and waiting. I then plan on ordering a kipper A500 8MB ram expansion.
My A500 is a rev6A board. Am I going about this the right way? If so, are you still making the V402 model or have things moved on? I'm not a huge fan of CF drives, so would really like to get one of these before your production moves to a CF only solution (I'm not sure whether you'll continue to make both or not?).
Thanks,
Paul
My A500 is a rev6A board. Am I going about this the right way? If so, are you still making the V402 model or have things moved on? I'm not a huge fan of CF drives, so would really like to get one of these before your production moves to a CF only solution (I'm not sure whether you'll continue to make both or not?).
Thanks,
Paul
Hi. I have a few built V402 adapters (and a number of blank pcbs.) V297 has both ide and cf connectors. 2.5" drives need adapter to connect to 40 pin ide header.
SAMSUNG-GT-B2710/B271MXXLK1 SHP/VPP/R5 Dolfin/2.0 QTV/5.3 SMM-MMS/1.2.0 profile/MIDP-2.1 configuration/CLDC-1.1 OPN-B
SAMSUNG-GT-B2710/B271MXXLK1 SHP/VPP/R5 Dolfin/2.0 QTV/5.3 SMM-MMS/1.2.0 profile/MIDP-2.1 configuration/CLDC-1.1 OPN-B
Excellent! Can I have a V402 adapter please? By adapter you simply mean in order to get the power to the 2.5" drive? I can get a 3.5" to 2.5" cable and grab the power from the square power connector socket or floppy power connector, so that should be okay I think. Would this be the correct way? How do other people connect up their drives?
PM me regarding payment information. Cheers.
Excellent! Can I have a V402 adapter please? By adapter you simply mean in order to get the power to the 2.5" drive? I can get a 3.5" to 2.5" cable and grab the power from the square power connector socket or floppy power connector, so that should be okay I think. Would this be the correct way? How do other people connect up their drives?
PM me regarding payment information. Cheers.
Yes, 40-pin to 44-pin cable, and +5v power connection needed.
Excellent! Can I have a V402 adapter please? By adapter you simply mean in order to get the power to the 2.5" drive? I can get a 3.5" to 2.5" cable and grab the power from the square power connector socket or floppy power connector, so that should be okay I think. Would this be the correct way? How do other people connect up their drives?
PM me regarding payment information. Cheers.
Yes, 40-pin to 44-pin cable, and +5v power connection needed.
Payment sent!
Cheers.
registered mail 10 euros.
v297 cfidecp 70 e.
v402 ide connector only 45 e.
SAMSUNG-GT-B2710/B271MXXLK1 SHP/VPP/R5 Dolfin/2.0 QTV/5.3 SMM-MMS/1.2.0 profile/MIDP-2.1 configuration/CLDC-1.1 OPN-B