Wanted Install disk for Fireball DMA MAST SCSI contoller

[mkegruber]

I have a Fireball DMA M.A.S.T. SCSI controller, but it needs the install disk to configure hard drives, it doesn’t work with HDToolBox, or at least fireball.device

Happy to make arrangements for an ADF copy.

 

[miggygossip]

Jeff @ Unitech Electronics out of Sydney did Amiga motherboard development in the day and is familiar with Oz products. He is knowledgeable and might be worth getting in contact with. https://unitechelectronics.com/

 

[Linozine]

Hi, i owned this card some time ago. It was in working order. Dumped the rom and shared it with Toni, i became the first M.A.S.T. rom for WinUAE

Me have been told that the card works more like an A2090(a), with an mountlist and had an old thick Fujitsu SCSI harddrive mounted on it.
The boot partition was very small and formatted in OFS (maybe a must). Rest of the partitions FFS.
My card came with an 2090 prep disk, never understood why. Maybe it works with this controller?

Find the FireBall.device attached, and some pictures.

I still have a full backup of the drive content (28MB) , maybe the prep software is on it.

Ow try and download DPU.lha from aminet. This was installed on my drive.

 

[mkegruber]

@Linozine , thanks for this. I've confirmed the ROM is ok, its one of the 3x FB chips thats the issue FBCTRL, FBACFG, FBDMAC

You wouldn't be able to produce an image of the HD by any chance?

 

[Linozine]

Attached it for you